Results 41 to 50 of about 98,877 (294)
Anti‐Slip Material‐Based Strategies and Approaches
Advanced Materials Technologies, EarlyView.This review highlights the principle mechanisms of slipping at the microscale, linking contact mechanics with a friction behavior model for surface interfaces. Main strategies to develop anti‐slip properties to the surfaces are discussed alongside standardized testing approaches.
Sogand Abbaspoor‐Zanjani +3 more
wiley +1 more source
Teshugang, 2017 The tested steel Cr22Mo 200 mm cast slab is heated at 1 150 °C for 150 min, hot-rough-rolled with 7 passes- finishing rolled with 7 passes to 4. 0 mm hot-rolled coil, annealed at 980 ~ 1 030 °C and cold-rolled to 0. 8 mm sheet and annealed at 950 〜1 020 °
邹勇, 卫英慧, 张晶晶
doaj
Advances in Solid‐Phase Processing Techniques: Innovations, Applications, and Future Perspectives
Advanced Materials Technologies, EarlyView.Based on practical manufacturing challenges, this review examines advanced solid‐phase processing techniques that overcome the inherent limitations of conventional melting‐based and traditional solid‐phase manufacturing, enabling the production of higher‐performance components at reduced cost through process innovation and improved supply‐chain ...
Tianhao Wang
wiley +1 more source
Teshugang, 2018 The tested and studied steel Cr22Mo (/% ： 0.005C, 0.40Si, 0.20Mn, 0.020P, 0.010S, 22.0Cr, 1.0Mo, 0.41 Cu, 0. 14Nb, 0.19Ti, 0.012 0N) is produced by 90 t BOF-VOD-LF-200 mm slab casting-hot rolling to 5.0 mm plate-annealing and cold rolling to 1.5 ~ 0.5 mm
周杰 +6 more
doaj
Hydrogel‐Based Functional Materials: Classifications, Properties, and Applications
Advanced Materials Technologies, EarlyView.Conductive hydrogels have emerged as promising materials for smart wearable devices due to their outstanding flexibility, multifunctionality, and biocompatibility. This review systematically summarizes recent progress in their design strategies, focusing on monomer systems and conductive components, and highlights key multifunctional properties such as
Zeyu Zhang, Zao Cheng, Patrizio Raffa
wiley +1 more source
Teshugang, 2017 The 3.5mm hot-rolled plate of stainless steel 06Cr13 (/%：0.03C,0.45Si,0.22Mn,0.020P,0.002S, 12.20Cr) cold-rolls down to 0.375mm cold-rolled sheet by 11 passes.
田华 +7 more
doaj
Robotic Materials With Bioinspired Microstructures for High Sensitivity and Fast Actuation
Advanced Science, EarlyView.In the review paper, design rationale and approaches for bioinspired sensors and actuators in robotics applications are presented. These bioinspired microstructure strategies implemented in both can improve the performance in several ways. Also, recent ideas and innovations that embed robotic materials with logic and computation with it are part of the
Sakshi Sakshi +4 more
wiley +1 more source
Journal of Materials Research and Technology, 2020 In this study, the effect of cold rolling on the recrystallization, grain growth of ferrite and the austenite formation in 0.14C–1.98Mn steel is studied extensively with different intercritical annealing times and temperatures.The starting sample is a 2 ...
Okan Poyraz, Bilgehan Ögel
doaj +1 more source
Navigating the Ethereal Tightrope: The Nanogenerator Manipulates Neurons for Immune Equilibrium
Advanced Science, EarlyView.This review explores how nanogenerators modulate neuroimmune responses, offering innovative strategies for treating neurological disorders. By interfacing with neural pathways, they enable precise control of immune activity, especially via vagus nerve stimulation.
Jia Du +5 more
wiley +1 more source
Teshugang, 2009 Effect of 0 ~ 0. 21 % Ti and 0 ~0. 29% Nb on structure, recrystallization texture, mechanical properties and formabilitv of ultra-low carbon ferrite stainless steel Cr18 (% ： 0. 008 ~0. 009C, 17. 48 ~ 17. 57Cr) has been studied.
孙丹 +4 more
doaj