Results 251 to 260 of about 280,496 (307)

Experimental investigation on the cold-forming effect of high strength cold-formed steel sections

Structures, 2023
Gong-Wen Li
exaly   +2 more sources

Cold Formed Steel Structures

2002
Discussions of cold formed steel sections, local buckling of plate elements and the design of cold formed steel members and connections.
Rhodes, J., Shanmugam, N.E.
openaire   +3 more sources

Utilization of Cold Work in Cold-Formed Steel

Journal of the Structural Division, 1975
An analysis to predict the yield strength of corners in cold-formed steel structural members was presented by Karren in 1967. It is based on plastic theory, using isotropic power-law strain hardening with von Mises’ yield condition and plastic potential. The analysis and consequent design formulas are quite complicated.
Niels C. Lind, Dilip K. Schroff
openaire   +1 more source

Cold Sizing of Cold- and Hot-Formed Gears

CIRP Annals, 2004
Abstract Today's markets require industrial forgers to manufacture complex near net shape or net shape parts at minimum unit costs. One way of meeting this challenge is to combine a cold or hot forming process with a subsequent cold sizing process in order to achieve the desired tolerances.
B.-A. Behrens, E. Doege
openaire   +1 more source

Cold Spray Forming of Inconel 718

Journal of Thermal Spray Technology, 2012
Inconel 718 was cold spray formed to a 6-mm thickness on an 8-cm diameter aluminum alloy tube using Sulzer Amdry 1718 powder and the Plasma Giken PCS-1000 cold spray system. The effects of spray particle velocity and post-spray heat treatment were studied. Post-spray annealing was performed from 950 to 1250 °C for 1-2 h.
Wong, W., Irissou, É., Vo, P., Sone, M., Bernier, F., Legoux, J.-G., Fukanuma, H., Yue, S.   +7 more
openaire   +2 more sources

Cold End Forming Of Welded Steel Tubes

International Journal of Manufacturing, Materials, and Mechanical Engineering, 2011
The production of custom and specific tube end shapes by cold end forming using a die is generally limited to seamless tubular parts. Current research work in the field follows the same trend as that of industry and, therefore, there is no accumulated experience, no practical design rules, and no information available in the specialized literature ...
L. M. Alves, J. G. Medeiros, P. A. F. Martins   +2 more
openaire   +1 more source

Cold Spray Forming Inconel 718

International Thermal Spray Conference, 2012
Abstract In this investigation, Inconel 718, a material known to cause nozzle clogging upon cold spraying, was cold spray formed to 6 mm-thick using the Plasma Giken cold spray system PCS- 1000. This was made possible due to the novel non-clogging nozzle material combined with a nozzle water cooling system.
Wong, W., Irissou, É., Legoux, J.-G., Bernier, F., Vo, P., Yue, S., Michiyoshi, S., Fukanuma, H.   +7 more
openaire   +1 more source