Results 11 to 20 of about 140,782 (296)
Case Studies in Construction Materials, 2023 Asphalt pavements are inevitably affected by coupled effects of dry-wet/freeze-thaw cycles, UV radiation, temperature, and loading during service, resulting in degradation of their road performance and reduced service life.
Xiaowei Feng +4 more
doaj +1 more source
3D-Concreting – Compositions, Techniques and Properties of Mixtures
Science & Technique, 2022 The paper reflects the problems of 3D-concreting technology, which is developing quite intensively in modern conditions of construction production. The most important condition for its practical implementation is the development of concrete mixture compositions that provide the necessary rheological (technological) properties for formation of products,
Yu. D. Samuilov +2 more
openaire +1 more source
Heterogeneity in relation to electrical and mineralogical properties of hematitic sandstone samples
Applied Water Science, 2020 Electrical properties of mixtures of composite materials are sensitive to texture between grains. Electrical measurements of hematite and sandstone composite mixture were performed in the frequency range (5 × 10−4 Hz–105 Hz).
Mohamed Mahmoud Gomaa
doaj +1 more source
Materials & Design, 2021 A physics-guided multi-objective optimization procedure is developed for the mixture design of functional cementitious materials containing microencapsulated phase change materials (MEPCM).
Zhenglai Shen +4 more
doaj +1 more source
Study on Properties of Bone Glue/Polyurethane Composite Modified Asphalt and Its Mixture
, 2021 Composite modification technology is widely used in the materials field. To enhance the property of polyurethane modified asphalt and realize its application in road engineering, the bone glue/polyurethane composite modified asphalt (CMA) was prepared ...
Tuo Huang +4 more
core +1 more source
Enforcement of Epoxy with Silica Fume and Carbon Fiber
Tikrit Journal of Engineering Sciences, 2018 A composite material has been prepared using epoxy resin as a matrix, reinforced with silica fume, carbon fiber, and their hybrid (mixture of silica fume and carbon fiber).
Amer Hameed Majeed
doaj +3 more sources
Effect of red food bean flour on the rheological properties of pasta
Vestnik MGTU, 2023 Legumes, in particular beans, differ significantly from cereals in protein content, amino acids, micro- and macroelements, so it can be argued that the addition of beans to the composite mixture will improve the nutrient composition and use the final ...
Maradudin M. S +2 more
doaj +1 more source
Electronic properties and morphology of Cu-phthalocyanine—C60 composite mixtures [PDF]
Journal of Applied Physics, 2014 Phthalocyanines in combination with C60 are benchmark materials for organic solar cells. Here, we have studied the morphology and electronic properties of co-deposited mixtures (blends) of these materials forming a bulk heterojunction as a function of the concentration of the two constituents. For a concentration of 1:1 of Cu-Phthalocyanine (CuPc):C60,
Roth, Friedrich +5 more
openaire +3 more sources
Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 2022 This study aims to investigate the utilization of recycled textile waste fiber (RTWF) as fiber reinforcement in cementitious lightweight composite mortars.
Lütfullah Gündüz, Şevket Onur Kalkan
doaj +1 more source
Fabrication of Al/Graphite/Al2O3 Surface Hybrid Nano Composite by Friction Stir Processing and Investigating The Wear and Microstructural Properties of The Composite [PDF]
Journal of Ultrafine Grained and Nanostructured Materials, 2012 Friction stir processing was applied for fabricating an aluminum alloy based hybrid nano composite reinforced with nano sized Al2O3 and micro sized graphite particles. A mixture of Al2O3 and graphite particles was packed into a groove with 1 mm width and
A. Mostafapour, S. T. Khandani
doaj +1 more source