Results 21 to 30 of about 355 (171)
Integral bridge abutment with composite dowels: structural scheme and failure patterns
Fracture and Structural IntegrityThis paper presents a novel integral abutment design incorporating a composite dowel girder and H-shaped steel pile abutments to enhance load-bearing capacity and construction efficiency.
Zhihua Xiong +4 more
doaj +5 more sources
A finite element thermal analysis of various dowel and core materials
Indian Journal of Dental Research, 2012 Aim: Thermal analysis of the temperature and stress distribution of parallel sided, threaded and non-threaded dowels and core materials under thermal loading within a maxillary central incisor using a three dimensional finite element study.
Shanti Varghese +3 more
doaj +1 more source
Proposal of concept for structural modelling of hybrid beams
Studia Geotechnica et Mechanica, 2022 Investigation on the behaviour of a hybrid beam is presented. Hybrid beam stands for an element with hybrid cross sections. This means sections that consist of steel and concrete parts, connected together with composite dowels, and both are considered ...
Kożuch Maciej, Skrętkowicz Łukasz
doaj +1 more source
Shear test method for characterization of plate connectors applied to concrete-filled steel tube columns and reinforced concrete columns [PDF]
Revista IBRACON de Estruturas e MateriaisShear connectors are often evaluated using the push test method prescribed by EN 1994-1-1:2004. This method is recommended for analyzing connectors applied to composite steel and concrete beams.
Rafael Eclache Moreira de Camargo +3 more
doaj +2 more sources
Вестник СибАДИ, 2020 Introduction. The construction of bridges using timber materials is experiencing a real boom throughout the world .The USA is considered to be a leader, where 80% of the bridges are made of timber or materials based on it.
V. A. Utkin, I. I. Gotovtsev
doaj +1 more source
Bending Moment Capacity of L-Shaped Mitered Frame Joints Constructed of MDF and Particleboard
BioResources, 2015 The impact of fastener type (glued and unglued butterfly dovetail keys, glued and unglued H-shaped dovetail keys, one-pin dowel, two-pin dowels, and plywood spline) and wood composite material type on the bending moment capacity of L-shaped mitered frame
Mohammad Derikvand, Carl Albert Eckelman
doaj +1 more source
Behavior of timber-timber composite structure connected by inclined screws
Magazine of Civil Engineering, 2023 The behavior of timber composite structure made of cross laminated timber (CLT) panel and glued laminated timber (GLT) beam was considered in this paper. Bending tests of a CLT-GLT composite structures with and without fasteners were conducted. CLT panel
Chernova Tatyana, Melekhov Vladimir
doaj +1 more source
Analysis and modelling composite timber-concrete systems: Design of bridge structure according to EN [PDF]
Građevinski Materijali i Konstrukcije, 2016 Timber-concrete composite structures are already applied more than 80 years in engineering practice, went trought the intuitive problem solution to the fully prefabricated hybride assemblies for dry building.
Manojlović Dragan +1 more
doaj +1 more source
Mechanical Behavior of Dowel-Type Joints Made of Wood Scrimber Composite [PDF]
Materials, 2016 As a renewable building material with low embodied energy characteristics, wood has gained more and more attention in the green and sustainable building industry. In terms of material resource and physical properties, scrimber composite not only makes full use of fast-growing wood species, but also has better mechanical performance and less inherent ...
He, Minjuan +3 more
openaire +2 more sources
Vestnik MGSU, 2023 Introduction. At the present time, environmental and logistical problems of the construction of prefabricated and temporary bridge structures are relevant. It is possible to create new constructive solutions based on renewable and recyclable materials to meet the requirements of load-bearing capacity and durability.
Tagir A. Zinnurov, Egor V. Novitsky
openaire +1 more source