Results 41 to 50 of about 6,383 (165)
A Study of Failure Strength for Fiber-Reinforced Composite Laminates with Consideration of Interface
Advances in Materials Science and Engineering, 2015 Composite laminates can exhibit the nonlinear properties due to the fiber/matrix interface debonding and matrix plastic deformation. In this paper, by incorporating the interface stress-displacement relations between fibers and matrix, as well as the ...
Junjie Ye +4 more
doaj +1 more source
On the Behavior of Fiberglass Epoxy Composites under Low Velocity Impact Loading
Advances in Mechanical Engineering, 2010 Response of fiberglass epoxy composite laminates under low velocity impact loading is investigated using LS-DYNA®, and the results are compared with experimental analysis performed using an instrumented impact test setup (Instron dynatup 8250).
Gautam S. Chandekar +2 more
doaj +1 more source
Materials Research Express, 2020 A series of hygrothermal aging experiments were performed on Ti/CF/PMR polyimide (TCPP) composite laminates in this work in order to verify the moisture diffusion characteristics and diffusion mechanism of the laminate.
Yubing Hu +4 more
doaj +1 more source
Influence of Stitching Parameters on Tensile Strength of Aramid/Vinyl Ester Composites
Medžiagotyra, 2013 Stitching process is used to provide structural integrity and through-the-thickness reinforcement in the composite materials. In this study, the effect of sewing parameters on tensile strength in stitched composite laminates was examined.
Mehmet KARAHAN +3 more
doaj +1 more source
Journal of Aeronautical Materials, 2020 In order to analyze the ablation damage law of composite laminates with fasteners subjected to the action of lightning current, the lightning finite element analysis model of fastener-containing laminates was constructed based on the principle of ...
SHAN Zezhong +3 more
doaj +1 more source
Results in MaterialsGreen composites, renowned for their biodegradable and recyclable attributes, have recently gained substantial prominence. Their sustainability, eco-friendliness, and lightweight characteristics position them as a compelling alternative to conventional ...
Priyanka Ravishankar +5 more
doaj +1 more source
Advances in Mechanical Engineering, 2020 A detailed investigation of damage and failure mechanisms of composite laminates under low-velocity impact (LVI) by experimental tests and numerical modeling is presented.
Miaomiao Duan +2 more
doaj +1 more source
Simulation of Delamination Crack Growth in Composite Laminates: Application of Local and Non-Local Interface Damage Models [PDF]
Mehran University Research Journal of Engineering and Technology, 2015 The use of composite laminates is increasing in these days due to higher strength and low density values in comparison of metals. Delamination is a major source of failure in composite laminates.
Hassan Aijaz +2 more
doaj
Buckling of composite cylindrical shells fabricated using thin-ply under axial compression
工程科学学报, 2018 Carbon-fiber reinforced polymer (CFRP) composites possess high specific stiffness and strength and have been widely used as structural materials in aerospace and aircraft engineering.
HUANG Chun-fang +5 more
doaj +1 more source
Failure Analysis of Laminated Composite Skew Laminates
Procedia Engineering, 2017 Abstract Failure analysis of laminated composite skew laminates subjected to transverse loads is presented by developing a C 0 finite element (FE) model based on higher order shear deformation theory (HSDT). In this theory the transverse shear stresses are taken as zero at the laminate top and bottom.
Kumar, Ajay, Chakrabarti, Anupam
openaire +1 more source