Results 11 to 20 of about 860,815 (299)
The Controlled Compound Layer of Ni-Coated Nitrided Pure Iron [PDF]
Nanomaterials, 2020 In order not to sacrifice nitrided layer thickness and reduce brittle compound layer thickness, Ni-coated pretreatment was carried out with electrodeposition on a pure iron surface, followed by gas nitriding.
Qianqian Shen +4 more
doaj +2 more sources
Compound Layer Design for Deep Nitrided Gearings
Metals, 2020 Deep nitriding is used to obtain a nitriding hardness depth beyond 0.6 mm. The long nitriding processes, which are necessary to reach the high nitriding hardness depths, mostly have a negative influence on the hardness and strength of the nitrided layer ...
Stefanie Hoja +2 more
doaj +3 more sources
Degradation kinetics of Ti-Cu compound layer in transient liquid phase bonded graphite/copper joints. [PDF]
Sci Rep, 2018 Lin J, Huang M, Yang W, Xing L.
europepmc +2 more sources
Metals, 2022 Plasma nitriding is widely used in various industrial applications to improve surface hardness and wear properties. Especially for tool steels, it is also used to improve the support and adhesion of diamond-like carbon (DLC) coatings.
Pierre Landgraf +6 more
doaj +1 more source
Potential of Nitrided and PVD-MoS2:Ti-Coated Duplex System for Dry-Running Friction Contacts
Lubricants, 2022 Self-lubricating coatings can be used to increase the service life of machine parts which are subjected to high mechanical loads. The present work is concerned with the combination of nitriding and a subsequent Ti-doped MoS2 coating.
Bastian Lenz +5 more
doaj +1 more source
Lubricants, 2022 Nitriding can significantly increase the load carrying properties of gears. While the diffusion layer is primarily responsible for improving the tooth root and flank load carrying capacity, the compound layer mainly determines the tribological properties
Stefanie Hoja +6 more
doaj +1 more source
Engineering Reports, 2022 A duplex treatment consisting of plasma nitriding (PN) and physical vapor deposition (PVD) significantly improves the thermal, tribological, and corrosion resistance of forming tools, and especially if they are intended for applications subject to high ...
Anke Dalke +7 more
doaj +1 more source
Engineering Reports, 2022 The stability of an iron nitride compound layer prepared by plasma nitriding of AISI D2 tool steel is investigated using in situ high‐temperature X‐ray diffraction at rising temperature up to 470°C and for an isothermal treatment at 450°C.
Ulrike Ratayski +5 more
doaj +1 more source
Applied Sciences, 2021 The effect of a controlled oxygen admixture to a plasma nitrocarburizing process using active screen technology and an active screen made of carbon was investigated to control the carburizing potential within the plasma-assisted process. Laser absorption
Jan Böcker +6 more
doaj +1 more source
Metals, 2020 In this paper, the X210CrW12 steel was subjected to gas nitriding to obtain a complex phase compound layer with limited porosity. The nitrided layer was characterized by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and X-ray ...
Yong Duan +3 more
doaj +1 more source