Results 111 to 120 of about 206,585 (306)
EPJ Web of Conferences, 2018 Expanded Polystyrene (EPS) foam material is widely used as an energy absorption engineering material. Its compression behaviour, both quasi-statically and dynamically, has been studied widely.
Ling Chen +3 more
doaj +1 more source
3D finite element simulations of reinforced concrete elements exposed to fire [PDF]
, 2017 Fire could dramatically reduce strength of reinforced concrete elements and it is considered one of the major threats for the structural safety of buildings: structural members may even collapse due to intensity and duration of fire.
Ceccato, Ciara, Lale, Erol
core
Advanced Engineering Materials, EarlyView.Four‐point bending tests are conducted in an argon atmosphere on commercial MgO‐C brick grades with and without MgO‐C recyclate from room temperature up to 1300 °C. No detrimental effect of the MgO‐C recyclates on bending strength is found. Instead, a decisive influence of the total carbon content is observed, with lower total carbon contents ...
Alexander Schramm +5 more
wiley +1 more source
Sol–Gel Derived Polymer Precursors for Stereolithography of ZrC
Advanced Engineering Materials, EarlyView.ZrC is a critical material target for extreme temperature conditions. This report describes a protocol for preparing ZrC ceramics via stereolithography and examines the impact of the polymer matrix on carbothermal reduction and mechanical stability of 3D printed ZrC.
Charles J. Rafalko +2 more
wiley +1 more source
Analysis of proteins released from osteoarthritic cartilage by compressive loading. [PDF]
Sci Rep, 2023 Tsuno H +9 more
europepmc +1 more source
Advanced Engineering Materials, EarlyView.This study investigates thermo‐chemical processes during high‐temperature testing of two commercial MgO‐C brick grades, one containing 47.5 wt.% MgO‐C recyclate. Using ETV, DTA/TG‐MS, XRD, and SEM/EDS/EBSD, mechanisms such as carbothermal reduction of magnesia, impurity incorporation into the secondary MgO surface layer, and calcium‐rich phase ...
Alexander Schramm +6 more
wiley +1 more source
Assessing Altered Coating Adhesion on Plasma‐Deoxidized Surfaces Under Oxygen‐Free Conditions
Advanced Engineering Materials, EarlyView.This study demonstrates the effectiveness of atmospheric pressure plasma pretreatment in modifying silicon and stainless steel surfaces to improve adhesion. Argon‐hydrogen plasma increases surface roughness and improves adhesion strength, whereas pure argon results in smoother surfaces and structural changes.
Selina Raumel +6 more
wiley +1 more source
Mechanical Properties of Steel-FRP Composite Bars under Tensile and Compressive Loading
International Journal of Polymer Science, 2017 The factory-produced steel-fiber reinforced polymer composite bar (SFCB) is a new kind of reinforcement for concrete structures. The manufacturing technology of SFCB is presented based on a large number of handmade specimens. The calculated stress-strain
Zeyang Sun +4 more
doaj +1 more source
Numerical analysis of reinforced concrete shear keys in immersion joints
, 2017 Immersion joints are susceptible to be damaged first under various loadings due ito their smaller stiffhess compared to the adjacent tunnel elements. The induced Ideformations and the forces in the joint are transferred by shear keys.
Taerwe, Luc, Xiao, Wenhao, Yuan, Yong
core
Evaluating Energy Absorption Performance of Filled Lattice Structures
Advanced Engineering Materials, EarlyView.Maximum stress must be considered to robustly evaluate energy absorber designs. This approach was applied to compare all types of absorbers in a single Ashby diagram and determine the utility of filling lattice voids with a second material. High‐performance fillers can improve the performance of lattices that are limited by buckling or catastrophic ...
Christian Bonney +2 more
wiley +1 more source