Results 11 to 20 of about 929,987 (277)
Design of Heavily Loaded Continuously Reinforced Concrete Pavements
, 2005 Industrial pavements are subjected to very large loads, e.g., axle loads exceeding 1000 kN and containers stacked in height and blocks equaling single loads of even higher magnitude.
Silfwerbrand, Johan,
core +9 more sources
Durability of concrete pavement strengthened with asphalt layer with FRP fibres
Archives of Civil Engineering, 2018 Pavements made of cement concrete, used for road constructions, are damaged during use. This applies to both the pavements of rural and forest roads with very low traffic loads, as well as road pavements with high traffic loads. One of the most effective
Tutka P. +4 more
doaj +1 more source
The Baltic Journal of Road and Bridge Engineering, 2020 Aggregate interlock is the dominant load transfer mechanism in non-dowelled Jointed Plain Concrete Pavements, as the innovative short concrete slabs.
Mauricio Pradena +2 more
doaj +1 more source
In-site health monitoring of cement concrete pavements based on optical fiber sensing technology
Journal of Road Engineering, 2023 Premature stress of cement concrete pavements is the coupled action of construction technique, structural material and environmental action. It is quite difficult to accurately get the actual stress distribution merely based on the theoretical or ...
Huaping Wang +3 more
doaj +1 more source
e-GFOS, 2021 Increasing the strength and durability of road surfaces is crucial. Therefore, the concrete compressive strength, flexural strength, frost, and abrasion resistance of fiber-reinforced concrete for rigid pavements are investigated in this study an ...
Andrey Mishutin +3 more
doaj +1 more source
Nordic Concrete Research, 2021 Concrete and asphalt are the two competitive materials for a highway. In Sweden, the predominant material for the highway system is asphalt. But under certain conditions, concrete pavements are competitive alternatives.
Yaqoob Saima +2 more
doaj +1 more source
Physicomechanical properties of concrete mixtures for construction of pavements at bus stations
Građevinar, 2018 A detailed research of three concrete mixtures, used in construction of pavements at bus stations in Novi Sad, is presented in the paper. The mixtures differ by aggregate content, quantity and type of cement, as well as by the type and quantity of ...
Miloš Šešlija +4 more
doaj +1 more source
Concrete Modular Pavements – Types, Issues And Challenges
The Baltic Journal of Road and Bridge Engineering, 2019 According to the European Asphalt Pavement Association, more than 90 per cent of the European road network is paved with asphalt. Constantly increasing traffic volume and climate change accelerate deterioration of current pavements.
Audrius Vaitkus +4 more
doaj +1 more source
Life cycle economic comparison between rigid and flexible pavement: a case study for the construction of wajen- garin barkamawa-dugurawa road in kano state nigeria [PDF]
Engineering and Technology Journal, 2023 Flexible pavements may be strengthened and enhanced incrementally to meet traffic needs, making them preferable to cement concrete roadways. Due to the rise of poor-quality bituminous pavements, Nigeria is promoting concrete pavements. Concrete pavements
Rowland Adewumi +2 more
doaj +1 more source
New Swedish Design Method for Concrete Pavements
, 2008 A new concrete pavement design method is currently introduced in Sweden. It consists of two parts: (i) computations of subgrade and base distresses and (ii) computations of concrete pavement distresses.
Silfwerbrand, Johan, +2 more
core +9 more sources