Numerical study on undrained cone penetration in structured soil using G-PFEM
This paper presents a model for the numerical simulation of cone penetration in structured soil under undrained conditions based on the Particle Finite Element Method.
L. Hauser, H. Schweiger
semanticscholar +3 more sources
Rock cone penetration test under lateral confining pressure
To assess the effect the field stress on the in situ cone penetration test of rock, a series of laboratory cone penetration tests was conducted to study the fundamental relationship between the cone penetration test results and the state of stress of ...
Kai Fang +4 more
semanticscholar +3 more sources
Interpretation of Cone Penetration Test Data in Layered Soils Using Cavity Expansion Analysis
Cavity expansion theory plays an important role in many geotechnical engineering problems, including the cone penetration test (CPT). One of the challenges of interpreting CPT data is the delineation of interfaces between soil layers and the ...
Pinqiang Mo, A. Marshall, Hai-Sui Yu
semanticscholar +3 more sources
Learning decision boundaries for cone penetration test classification
In geotechnical field investigations, cone penetration tests (CPT) are increasingly used for ground characterization of fine‐grained soils. Test results are different parameters that are typically visualized in CPT based data interpretation charts.
G. Erharter +4 more
semanticscholar +1 more source
An analysis of the influence of clay structure on piezocone penetration test results
The effect of clay structure on the piezocone penetration test results and its mechanism are not very clear, the structured Cam-clay model is firstly program-implemented in the ABAQUS software.
Rui JIA, Dong ZHAO, Huayang LEI
doaj +1 more source
Indirect Determination of Soil Young’s Modulus in Lithuania Using Cone Penetration Test Data
Simplified methods based on cone penetration test results are commonly used to determine soil deformation modulus, depending on the engineering geological and geotechnical conditions and the complexity of the computational approach.
Tadas Tamošiūnas +2 more
doaj +1 more source
Cone penetration tests in dry and saturated Ticino sand
It is commonly assumed that dry and saturated sands exhibit similar cone resistance–relative density relationships. Some studies pointed out that partial saturation and calcareous sands with considerable fines content are potential factors affecting ...
M. O. Kluger +5 more
semanticscholar +1 more source
Comparison of Rheological Methods to Measure Grease Degradation
In a previous paper, methods that have been used to quantify grease mechanical degradation were compared, finding that crossover stress is a practical method for estimating the cone penetration value of a grease using a small sample.
Alan Gurt, Michael Khonsari
doaj +1 more source
Study on the Applicability of Needle/Cone Penetration Experiment for Asphalt-Rubber
In order to quantitatively study the applicability of needle/cone penetration experiment for asphalt-rubber (AR), the dynamic model of needle/cone in penetration process was established based on the Kelvin model, and the different impacts of crumb rubber
Zechen Yao +5 more
doaj +1 more source
Verification of strength resistance of sandy soil using small scale penetrometer tests
This study focuses on utilizing cone penetrometer models to determine strength (resistance) of sandy soil and also assessment how the relative density and the angle of friction effects on the measured cone penetration resistance in sandy soil.
Hiba D. Saleem +2 more
doaj +1 more source

