Results 81 to 90 of about 6,027 (241)

Development of a Mechanically Regenerating Desublimator for Freeze‐Drying Systems in the Food Industry

Chemie Ingenieur Technik, EarlyView.
Thermal defrosting limits desublimator efficiency in freeze‐drying. This review and case study compares thermal versus mechanical regeneration, links frost properties and external heat transfer to energy demand, and summarizes pilot‐scale scraping results enabling single‐unit, continuous lyophilization.
Moritz Krummenacher, Mirko Kleingries, Edgar Zimmer, Roman Blättler   +3 more
wiley   +1 more source

Influence of Particle Size, Moisture, and Cloud Density on Wood Dust Ignition

Chemie Ingenieur Technik, EarlyView.
The ignition and combustion of particle clouds are strongly affected by particle interactions. This study uses spectroscopy to examine effects of particle size, water content, and cloud density. Results show ignition delay rises with larger size and density, whereas combustion duration depends mainly on water and density due to moisture‐driven ...
Matteo Giesen, Daniel Bernhardt, Michael Beckmann   +2 more
wiley   +1 more source

Premixed Combustion Characteristics of Coal Gasification Fuel in Constant Volume Combustion Chamber

Journal of the Environmental Sciences, 2006
【The coal gasification fuel is important to replace petroleum fuel. Also they have many benefits for reducing the air pollution. Measurements on the combustion characteristics of synthetic gas from coal gasification have been conducted as compared with LPG in constant volume combustion chamber.
openaire   +2 more sources

Experimental Studies of Fuel Injection in a Diesel Engine with an Inclined Injector

Energies, 2019
Comparative experimental studies of fuel sprays evolution dynamics in a constant volume chamber were carried out with a view to reduce the uneven distribution of diesel fuel in the combustion chamber when the Common Rail injector is inclined.
V. G. Kamaltdinov, V. A. Markov, I. O. Lysov, A. A. Zherdev, V. V. Furman   +4 more
doaj   +1 more source

Global and Detailed Calculation of Tube Wall Temperature in a Process Furnace Steam Superheater

Chemie Ingenieur Technik, EarlyView.
This study presents a comparison between an iterative global model and multiple approaches to a new non‐iterative model with the purpose of predicting tube wall temperature of a superheater. The results show that the non‐iterative method achieves sufficient accuracy while improving the prediction of local temperature distribution and better ...
Anežka Michálková, Zdeněk Jegla
wiley   +1 more source

Hydroprocessing of synthetic kerosene over a non‐sulphided Ni/Al2O3 catalyst: Impact of alcohols and ketones on alkene conversion

The Canadian Journal of Chemical Engineering, EarlyView.
Abstract Synthetic jet fuel containing non‐petroleum‐derived kerosene can be produced from synthetic kerosene obtained through processes that include a hydroprocessing step. The potential use of non‐sulphided (reduced) nickel supported on alumina (Ni/Al2O3) was evaluated as an alternative to sulphided catalysts to saturate alkenes in sulphur‐free ...
Garima Chauhan, Felix Link, Cibele Melo Halmenschlager, Arno de Klerk   +3 more
wiley   +1 more source

Effect of different flue gas recirculation rates on low‐NOx combustion characteristics: A numerical simulation based on the combustion process of a gas boiler

The Canadian Journal of Chemical Engineering, EarlyView.
Abstract NOx emissions from gas boilers severely impact the environment, and flue gas recirculation (FGR) technology can effectively reduce such emissions, yet the effects of different FGR rates on combustion performance and NOx formation remain unclear. This study thus used numerical simulation (via ANSYS Fluent, adopting the realizable k‐ε turbulence
Chao Min, Shuhao Xu, Yitao Yang, Peng Wang   +3 more
wiley   +1 more source

In‐situ asphaltene capture with iron oxide nanoparticles in steam‐assisted gravity drainage (SAGD) for improved recovery and partial upgrading of bitumen

The Canadian Journal of Chemical Engineering, EarlyView.
Key improvements obtained by incorporating nanoparticles into a lab‐scale SAGD process configuration. The bar plots show enhanced oil recovery, reduced viscosity, and increased asphaltene adsorption in nanoparticle‐assisted scenarios compared with conventional SAGD.
Luis Prada, Saleh S. Baakeem, Mabkhot BinDahbag, M. Daniela Contreras‐Mateus, Jesus Botett, Afif Hethnawi, Nashaat N. Nassar   +6 more
wiley   +1 more source

Economic and environmental implications of the development of UASB reactors in Mexico for sustainable industrial wastewater treatment

The Canadian Journal of Chemical Engineering, EarlyView.
Abstract The objective of this work is to demonstrate that the inclusion of an up‐flow anaerobic sludge bed (UASB reactor) within an industrial wastewater treatment plant reduces the plant's investment and operating costs compared to a system based solely on conventional complete‐mix activated sludge (CMAS), operating under the same design principles ...
Juan Manuel Morgan‐Sagastume, Adalberto Noyola   +1 more
wiley   +1 more source

Photothermal bubble: Dynamics, manipulation, and applications

Droplet, EarlyView.
As a versatile platform for bubble manipulation, photothermal techniques empower diverse operations: planar translation by scanning the laser spot, sustained periodic bouncing from competing thermal and hydrodynamic flows, and even guided 3D trajectories achieved by tailoring the heating configuration.
Man Hu, Feng Wang, Daosheng Deng
wiley   +1 more source