Results 11 to 20 of about 17,100 (191)

Investigation of interdiffusion and intermetallic compounds in Al–Cu joint produced by continuous drive friction welding

Engineering Science and Technology, an International Journal, 2016
In this paper, the joints between Al and Cu bars were fabricated by continuous drive friction welding. The microstructures and the compositions of the composites were analyzed by SEM, EDS and XRD.
Yanni Wei, Jinglong Li, Jiangtao Xiong, Fusheng Zhang   +3 more
doaj   +3 more sources

Effect of Friction Pressure on Microstructure and Properties of Friction Welded Joints of Pure Aluminum/304 Stainless Steel

Medžiagotyra, 2021
Continuous drive friction welding was used to realize the high quality connection between pure aluminum and 304 stainless steel. The composition of interface micro-zone and mechanical properties of joint were analyzed by scanning electron microscopy (SEM)
Lizhe ZHAO, Wenbiao GONG, Rui ZHU, Mingyue GONG, Heng CUI   +4 more
doaj   +1 more source

Investigation of deformation and element diffusion in joint interface of mild carbon steel and HCrWCI welded by friction welding

Cumhuriyet Science Journal, 2021
In this study, continuous drive friction welding process is selected for joint dissimilar high chromium white cast iron and mild carbon steeel. The microstructure, presence and diffusion of elements, deformation in interface of weld metal were analyzed ...
Mustafa Özaslan, Tanju Teker
doaj   +1 more source

Pengaruh Double Chamfer terhadap Distribusi Suhu dan Daerah Zpl pada Sambungan Las Gesek AL6061 dengan Simulasi Komputer

Rekayasa Mesin, 2021
Welding is one of the metal joining processes in manufacturing. CDFW (continuous drive friction welding) is a welding process to join two workpieces by applying pressure at one end of the object and rotating another one where the friction action applies ...
Mesti Nadya, Yudy Surya Irawan, Moch. Agus Choiron   +2 more
doaj   +1 more source

The mechanical properties of 1060 aluminum joint by continuous drive friction welding [PDF]

Proceedings of the 5th International Conference on Advanced Design and Manufacturing Engineering, 2015
KEYWORD: Friction welding, Aluminum, Mechanical properties ABSTRACT: Pure aluminum was welded by friction welding in this study. Friction welding of pure aluminum was performed in the fixed upset pressure and friction pressure respectively. The tensile strength of joints was measured.
Lihu Cui, Longlong Hou, Zhongbao Shen, Ranfeng Qiu, Qingzhe Li   +4 more
openaire   +1 more source

Influence of CDFW Process Parameters on Microstructure and Mechanical Properties of U75V Rail Steel Welded Joint

Metals, 2022
In the present paper, the continuous-drive friction welding (CDFW) technology has been successfully applied to join the U75V rail steel. The base metal (BM) of U75V rail steel is lamellar pearlite, and the weld zone could be clearly divided into three ...
Han Zhang, Chang’an Li, Zhiming Zhu
doaj   +1 more source

Invited Article: CO_2 laser production of fused silica fibers for use in interferometric gravitational wave detector mirror suspensions [PDF]

, 2011
In 2000 the first mirror suspensions to use a quasi-monolithic final stage were installed at the GEO600 detector site outside Hannover, pioneering the use of fused silica suspension fibers in long baseline interferometric detectors to reduce suspension ...
Barton, M. A., Bell, A., Cagnoli, G., Cantley, C. A., Crooks, D. R. M., Cumming, A., Grant, A., Hammond, G. D., Harry, G. M., Heptonstall, A., Hough, J., Jones, R., Kelley, D., Kumar, R., Martin, I. W., Robertson, N. A., Rowan, S., Strain, K. A., Tokmakov, K., van Veggel, M.   +19 more
core   +2 more sources

Effect of Rotation Speed on Microstructure and Mechanical Properties of Continuous Drive Friction Welded Dissimilar Joints of 6061-T6 Al and Copper

Metals, 2022
The continuous drive friction welding of 6061-T6 Al and copper was investigated herein. The results show that with an increase in rotation speed, the width of the welded zone was gradually increased with the generation of higher temperatures, and the ...
Xianyong Zhu, Yuexiang Fan, Liangwen Xie, Xiong Xiao, Peng Wang, Song Yang, Cheng Jiang   +6 more
doaj   +1 more source

Microstructures and Mechanical Properties of Al/Fe and Cu/Fe Joints by Continuous Drive Friction Welding

Advances in Materials Science and Engineering, 2018
The dissimilar pure metals Al/Fe and Cu/Fe with different metallurgical compatibility were joined by continuous drive friction welding. The friction weldability was investigated.
Yanni Wei, Fu Sun
doaj   +1 more source

Vibrations in CDFW

Entropy, 2020
Continuous drive friction welding is a solid-state welding process that has been experimentally proven to be a fast and reliable method. This is a complex process; deformations in the viscosity of a material alter the friction between the surfaces of the
Daniel Soares de Alcantara, Pedro Paulo Balestrassi, José Henrique Freitas Gomes, Carlos Alberto Carvalho Castro   +3 more
doaj   +1 more source