Results 1 to 10 of about 7,136 (312)
Modeling the stress-strain state of a circular plate subject to general corrosion according to various models [PDF]
E3S Web of Conferences, 2021 Quite a lot of works have been devoted to the problem of modeling the behavior of thin-walled structures exposed to an aggressive environment leading to corrosive wear of their surface.
Ovchinnikov Ilya, Mavzovin Vladimir
doaj +1 more source
Microstructure and Tribological Behavior of Cu-2.5Ti Alloy in Two Different Environments [PDF]
Archives of Metallurgy and Materials, 2022 In this study, the nominal composition of Cu-2.5Ti alloy was thermally treated to obtain homogenized, aged, and 40% prior cold-rolled+ aged samples. The hardness, wear behavior, and microstructure of samples were investigated.
Ceren Efe +3 more
doaj +1 more source
Investigation of Microstructure, Mechanical and Corrosion Properties of Biodegradable Mg-Ag Alloys [PDF]
Archives of Metallurgy and Materials, 2022 In this study, microstructure, mechanical, corrosion and corrosive wear properties of Mg-xAg the as-cast and extruded alloys (x: 1, 3 and 5 wt. % Ag) were investigated.
Levent Elen +4 more
doaj +1 more source
Metals, 2023 Microstructure, mechanical properties, wear resistance, corrosion and corrosive wear resistance of AlCrFeNiWx (x = 0, 0.1, 0.2, 0.3 and 0.4) medium-entropy alloys (MEAs) prepared by vacuum arc melting process were investigated.
Mingyu Wu +6 more
doaj +1 more source
Design and development of a novel sliding friction and wear tester with complex working conditions
Scientific Reports, 2021 Serious wear phenomena occur in mining machinery under complex working conditions, and the wear of machine parts is primarily caused by the synergistic effect of adhesive wear, abrasive wear, corrosive wear, etc.
Jinrong Chai +4 more
doaj +1 more source
Polymer Testing, 2022 As an essential rubber mixing equipment in continuous production, an internal mixer should have a long service life while operating at high intensity.
Deshang Han +8 more
doaj +1 more source
A comparative Study on the Mechanical and Corrosion Properties of the ZM20 and ZM21 Alloys after Casting and Rolling [PDF]
Archives of Metallurgy and Materials, 2022 In this study, the effects of grain refinement and production methods on the corrosion, corrosive wear and mechanical properties of the as-cast and as-rolled Mg-2 wt.% Zn (ZM20) and Mg-2 wt.% Zn-0,51 wt.% Mn (ZM21) alloys were examined by using OM, XRD ...
Halil Ahmet Gören +4 more
doaj +1 more source
Tribocorrosion behaviour of NiTiNOL60 alloy in an alkaline environment
Results in Engineering, 2023 NiTi-based alloys subjected to aggressive tribocorrosion working conditions can deteriorate by the combined action of mechanical and chemical wear.
Anthony Okoani +2 more
doaj +1 more source
JEMMME (Journal of Energy, Mechanical, Material, and Manufacturing Engineering), 2020 The tribological performance of commercially used tire rubber was evaluated at ambient conditions under dry, wet and 3.5% NaCl corrosive environment. A pin-on-disc apparatus was used for the experiment.
Samiul Kaiser +2 more
doaj +1 more source
Erosion-corrosion and wear [PDF]
Le Journal de Physique IV, 1993 The basic processes of wear, erosion and erosion-corrosion are reviewed. It is shown that oxide debris can accelerate wear when it is present as particulates, or protect and reduce friction when it is present as a glaze. Erosion-corrosion processes can be understood and organized in a series of regimes that represent a sequence of change in the ...
Birks, N., Pettit, F., Rishel, D.
openaire +1 more source