Results 91 to 100 of about 28,993 (207)
The foamed aluminum filled crash-box with induction grooves on the side wall was made finite element analysis in the impact process by LS-DYNA,and the parameters influence of induction grooves on the energy absorption characteristics of crash-box was ...
WANG ChunHua, JIANG ZongShuai, GUO Yue
doaj
Design of leg for crash test dummy
This thesis is devoted to the design model of the lower limbs crash test dummies. It describes how the dummy developed historically, what are currently available for crash tests, what they are made and what their future will be.
Maršálek, Petr
core
FEA crash test of a LEGO® passenger car model
This master’s thesis deals with a FEA crash test of a LEGO® Ferrari 812 Competizione model. There are many parameters that must be considered in the calculation of FEA crash test of vehicles.
Barančoková, Zoja
core
Light Airplane Crash Test at Three Pitch Angles
Three similar twin-engine general-aviation airplane specimens were crash tested at the Langley Impact Dynamics Research Facility at 27 m/sec, a flight-path angle of -15deg, and pithch angles of -15deg, 0deg, and 15deg.
Alfaro-Bou, Emilio +1 more
core
Automated crash fault localization
Debugging application crashes is an expensive and time-taking process, relying on the developer’s expertise, and requiring knowledge about the system.
Popping, Sven (author)
core
Full-scale crash test of a CH-47C helicopter
A full-scale crash test of a large troop/cargo carrying CH-47C helicopter was conducted at the Langley impact dynamics research facility. The crash test of this large helicopter was performed as part of a joint U.S.
Castle, C. B.
core
Research on finite element simulation and full-scale-vehicle crash test of B750HL bridge barrier. [PDF]
Zhang M, Bu Q.
europepmc +1 more source
Evaluation of Test/Analysis Correlation Methods for Crash Applications
A project has been initiated to improve crash test and analysis correlation. The work in this paper concentrated on the test and simulation results for a fuselage section. Two drop tests of the section were conducted.
Bark, Lindley W. +2 more
core
A study on the application of diffuse axonal multi-axis general evaluation for brain injury assessment in small overlap barrier crash test. [PDF]
Fu Z +5 more
europepmc +1 more source
Analysis of Existing Work-Zone Devices with MASH Safety Performance Criteria, TPF-5(018), 2009
Crashworthy, work-zone, portable sign support systems accepted under NCHRP Report No. 350 were analyzed to predict their safety peformance according to the TL-3 MASH evaluation criteria. An analysis was conducted to determine which hardware parameters of
core

