Results 261 to 270 of about 34,190 (312)
Some of the next articles are maybe not open access.
DC link voltage balancing in multilevel inverter
2015 International Conference on Circuits, Power and Computing Technologies [ICCPCT-2015], 2015This paper presents an effective method to control the DC link voltage balance in diode clamped Multilevel Inverter. To trigger the gate pulse for the switches, Level Shifted PWM technique is used. Two closed PI controllers are used for balancing the DC voltage control and load voltage control and also used for analyzing the performance parameters and ...
M Balamurugan +4 more
openaire +1 more source
Method for balancing capacitors voltages on split DC-links
2016 18th European Conference on Power Electronics and Applications (EPE'16 ECCE Europe), 2016A technique to actively balance the voltages on series-connected capacitors designated to split DC sources whose loads comprise power converters is presented. It performs such balancing dynamically, enabling the voltage equalization even for small capacitors under wide power and voltages ranges. Proposal consists on lightly controlling the power of one
Douglas Pappis +2 more
openaire +1 more source
Generalized DC-link voltage balancing control method for multilevel inverters
2013 Twenty-Eighth Annual IEEE Applied Power Electronics Conference and Exposition (APEC), 2013This paper presents a general dc-link voltage balancing control method for multilevel inverters based on a generalized space vector pulse width modulation (SVPWM) scheme, with no requirements for additional auxiliary-power circuits. The SVPWM scheme generates all the available switching states and switching sequences based on two simple mappings, and ...
Yi Deng, Koon Hoo Teo, Ronald G. Harley
openaire +1 more source
Comparison of DC-link Voltage Balancing Strategies for Three Level NPC Inverter
2021 International Conference on Intelligent Technologies (CONIT), 2021A major drawback of three-level neutral point clamped (NPC) inverters is the imbalance in the DC-link voltage. The unbalanced capacitor voltage fluctuates the neutral point voltage and causes low-frequency oscillations subsequently. Therefore, balancing the dc-link capacitor voltage is essential for NPC inverters in order to minimize the neutral point ...
G. Pavan Kumar, K.S Jiji
openaire +1 more source
Diode-clamped multilevel converters: a practicable way to balance DC-link voltages
IEEE Transactions on Industrial Electronics, 2002The converter topologies identified as diode-clamped multilevel (DCM) or, equivalently, as multipoint clamped (MPC), are rarely used in industrial applications, owing to some serious drawbacks involving mainly the stacked bank of capacitors that constitutes their multilevel DC link. The balance of the capacitor voltages is not possible in all operating
MARCHESONI, MARIO, P. TENCA
openaire +2 more sources
DC-link voltage balancing method for a hybrid asymmetric multilevel converter
2013 15th European Conference on Power Electronics and Applications (EPE), 2013The paper presents the dc-link voltage balancing method for a five-level hybrid asymmetric multilevel converter based on a neutral point clamped (NPC) converter with H-bridge (HB) converters. The considered converter, which is referred to as NPC-HB, is treated in this paper as a modification of the classic three-level NPC converter.
Marcin Zygmanowski +2 more
openaire +1 more source
DC Link Capacitor Voltage Balancing Method for Diode-Clamped Multilevel Converters
2019 IEEE 28th International Symposium on Industrial Electronics (ISIE), 2019This paper proposes a new capacitor voltage balancing method for diode-clamped multilevel inverters. In this method, proper redundant switching state is selected according to clamp points' voltages. The proposed method is independent of the phase and level numbers and is computationally optimized for practical implementation.
Jalal Amini, Mehrdad Moallem
openaire +1 more source
Component minimized AC/DC/AC converter with DC-link capacitors voltages balancing
IEEE EUROCON 2009, 2009This paper investigates component minimized topology of single-phase to three-phase AC/DC/AC Pulse Width Modulated (PWM) converter. It consists of half-bridge rectifier and two-leg (B4) inverter and is designed for low-power induction machine (IM) drive application.
Krzysztof Rafal +3 more
openaire +1 more source
Voltage balancing in DC link capacitor for seven level cascaded multilevel inverter
2013 IEEE Conference on Clean Energy and Technology (CEAT), 2013Multilevel inverters enables implementation of high-power-medium-voltage applications using smaller rated devices resulting to cheaper and compact design. Currently, researchers are interested in developing distributed generation (DG) with multilevel topology that produces not just active power demands, but also incorporated with custom power ...
A. F. Jabbar, M. Mansor
openaire +1 more source
DC-Link Voltage Balancing and Regulation of Split-Capacitor VSI Based DSTATCOM
2020 IEEE International Conference on Power Systems Technology (POWERCON), 2020In this paper, a modified VSI based Split Capacitor distribution static compensator (SC-DSTATCOM) is presented to ensure the quality of power in a distribution system. The imbalance of voltage across the split capacitors of SC-DSTATCOM is a serious issue when a load current contains dc components.
P.A. Afsher, M.V. Manoj Kumar
openaire +1 more source