Results 101 to 110 of about 4,153 (217)

Optimization of the Production of Rubber Compounds Using Mathematical Models

Advanced Engineering Materials, EarlyView.
Rubber compounds were mixed in a batch internal mixer, and symbolic regression was used to derive mathematical models linking recipe and process parameters to ram path, torque, and mixing quality (incorporation, dispersion, distribution). Subsequent optimization with evolutionary algorithms identified operating conditions that reduce specific energy ...
Anke Bardehle, Andreas Limper, Ulrich Giese, Carlos Lucke, Mario Beiner, Christoph Gögelein, Lisa Leuchtenberger‐Engel, Christian Hopmann   +7 more
wiley   +1 more source

Mechanical and Moisture Performance of Dense-Graded Cold-Recycled Asphalt with 60% RAP and Cement-Fly Ash Additives. [PDF]

Materials (Basel)
Mallano AQ, Memon NA, D'Andrea A, Loprencipe G, Moretti L.   +4 more
europepmc   +1 more source

Evaluation of Crumb Rubber Modification of Louisiana Mixtures [PDF]

Since 2008, the Louisiana Department of Transportation and Development (DOTD) has permitted the use of crumb rubber modifiers (CRM) in hot mix asphalt (HMA) mixtures in accordance with its specifications.
Cooper III, Samuel, Mata, David, Salari, Saman, Louisiana Transportation Research Center   +3 more
core  

Characteristics of Open-Graded Friction Course Macrotexture and Macrostructure and Its Effect on Skid Resistance under Rainfall

An Open-Graded Friction Course (OGFC) presents a rough surface and a porous structure and provides skid resistance under wet conditions, differing from that of a dense graded mixture.
Jie Gao, Liang Song, Wei Ye, Di Yun
core   +1 more source

Modular Critical Element Recycling Platform Using a Nanoporous Additively Manufactured Gyroid

Advanced Engineering Materials, EarlyView.
A modular recycling platform integrates 3D‐printed nanoporous gyroid structures to enable efficient critical element recovery. This system utilizes a hierarchical architecture, combining macroscopic channels with polymerization‐induced nanoscale porosity. By systematically tuning structural wall thickness and resin formulation, the platform achieves an
Xiangyu Gao, Keldy Mason, Mert Gülçür, Rachel Paddock‐Lamb, Prince Alvin Fofanah, Zachariah A. Page, Michael Cullinan   +6 more
wiley   +1 more source

Capacitance-Based Characterization of Air-Void Distribution in Asphalt Mixtures Using a Saturated Reference Field. [PDF]

Sensors (Basel)
Hu X, Dong Q, Shi B, Yao K, Liu Z.
europepmc   +1 more source

Ontology‐Aligned Structuring and Reuse of Multimodal Materials Data and Workflows Toward Automatic Reproduction

Advanced Engineering Materials, EarlyView.
Reproduction of stacking fault energy calculations from literature with a semi‐automated large language model‐assisted extraction procedure: extraction of simulation protocol, atomistic structures, computational parameters, and reported results, ontology alignment, knowledge graph construction and, finally, recomputation forvalidation.
Sepideh Baghaee Ravari, Abril Azocar Guzman, Sarath Menon, Stefan Sandfeld, Tilmann Hickel, Markus Stricker   +5 more
wiley   +1 more source

Mixing Workability of Polymer-Modified Asphalt Mixtures Based on Discrete Element Modeling. [PDF]

Polymers (Basel)
Lin Y, Li S, Huang J, Jiang Z.
europepmc   +1 more source

Machine Learning‐Supported Analysis for Predicting and Visualizing Nonlinear Relationships Between Material Properties in Electroplated Chromium Layers

Advanced Engineering Materials, EarlyView.
This study applies machine learning regression to predict chromium layer thickness in decorative trivalent chromium electroplating, using 441 experiments from laboratory‐scale (1L) and pilot‐scale (14L) setups. Tree‐based models, particularly CatBoost, outperformed linear regression by capturing nonlinear parameter interactions (R2$R^2$ up to 0.77 ...
Christoph Baumer, Christopher Mai, Luca Eisentraut, Andreas Bund, Ricardo Buettner   +4 more
wiley   +1 more source

Multi-Scale Performance Assessment of Asphalt Mixtures Modified with Waste PVC Foils of Varying Geometries. [PDF]

Polymers (Basel)
Kırbaş U, İskender E, Kütük-Sert T, Hayat F, Kütük S.   +4 more
europepmc   +1 more source