Results 231 to 240 of about 52,769 (299)

Effect of substructure fabrication method and design on the fracture resistance properties of metal–ceramic restorations

open access: yesJournal of Prosthodontics, EarlyView.
Abstract Purpose In metal–ceramic restorations, the substructure fabrication method and design may affect the prognosis of the prosthesis. This study evaluated and compared the fracture resistance of metal–ceramic restorations fabricated with different substructure fabrication methods using two different alloy powders and designs.
Young‐Hoon Lee   +4 more
wiley   +1 more source

Assessing the influence of titanium dioxide nanotubes incorporation on thermal and thermomechanical characteristics of 3D‐printed denture base resin

open access: yesJournal of Prosthodontics, EarlyView.
Abstract Purpose This study aims to evaluate the effects of adding titanium dioxide (TiO2) nanotubes (NTs) to three‐dimensional (3D) printed denture base resin on the thermal and thermomechanical properties, which have high clinical relevance. Materials and Methods TiO2 NTs with dimensions of 30–70 nm in diameter and 2–4 µm in length were added to the ...
Zaid Basil Al‐enbary   +2 more
wiley   +1 more source

Assessment of fit accuracy and retentive strength of additively manufactured zirconia crowns luted to Ti‐base abutments with different resin cements: An in vitro study

open access: yesJournal of Prosthodontics, EarlyView.
Abstract Purpose This study investigated the influence of cement gap size on the marginal and internal fit, and cement gap size and type on retention of additively manufactured zirconia (AM‐Z) crowns on titanium bases (Ti‐base). Materials and Methods A total of 135 zirconia crowns were designed with three different cement gap sizes: 20 µm, 30 µm, and ...
Rafat Sasany   +2 more
wiley   +1 more source

RETRACTED: Surface gloss and micro‐CT analysis of additively and subtractively manufactured resin composites and zirconia after simulated tooth brushing with different bristle types and toothpaste formulations: An in vitro study

open access: yesJournal of Prosthodontics, EarlyView.
Abstract Purpose This study aimed to evaluate the effects of simulated tooth brushing with different bristle types and two toothpaste formulations on the surface gloss and structural integrity of additively (AM) and subtractively (SM) manufactured resin composites and zirconia.
Ahmet Faruk Ertürk   +3 more
wiley   +1 more source

Effect of margin thickness and cement gap on the fabrication and fit accuracy of additively manufactured crowns in definitive resins with different filler content

open access: yesJournal of Prosthodontics, EarlyView.
Abstract Purpose To evaluate how commercially available composite resins in varying filler content affect the fabrication and fit accuracy (trueness and precision) of additively manufactured (AM) definitive crowns with different margin thickness and cement gaps by comparing them to subtractively manufactured (SM) polymer‐infiltrated ceramic crowns ...
Mustafa Borga Dönmez   +5 more
wiley   +1 more source

Impact of monomer contamination of isopropanol during post‐rinsing on the accuracy of dental models fabricated by vat photopolymerization

open access: yesJournal of Prosthodontics, EarlyView.
Abstract Purpose The aim of this study was to investigate the impact of an increasing level of monomer contamination of isopropanol (isopropyl alcohol [IPA]) during post‐rinsing on the dimensional stability of test samples produced by vat photopolymerization.
Florian Flierl   +5 more
wiley   +1 more source

Technique for retrieving a locked implant‐supported bar overdenture following direct attachment pick‐up procedure

open access: yesJournal of Prosthodontics, EarlyView.
Abstract Implant‐assisted complete dentures, particularly those utilizing implant‐supported bar systems (RP‐4), offer significant advantages in patient satisfaction and prosthetic function compared to conventional dentures. However, complications can arise during the direct intraoral pick‐up procedure, such as inadvertent resin polymerization in ...
Weiqing Liu   +3 more
wiley   +1 more source

Bond strength enhancement for additively manufactured zirconia: Micro‐retentive design approach

open access: yesJournal of Prosthodontics, EarlyView.
Abstract Purpose To investigate the effect of digitally designed micro‐retention features on the bond strength of additively manufactured (AM) zirconia copings. Materials and Methods Sixty titanium base abutments (NobelParallel, NobelBiocare), pretreated with 50 µm alumina particles were divided into four groups (n = 15 per group); one group with ...
Rama B. Al‐Rashdan   +5 more
wiley   +1 more source

Effect of material, prosthesis height, and aging on the fracture strength of additively and subtractively manufactured implant‐supported cantilevered prostheses

open access: yesJournal of Prosthodontics, EarlyView.
Abstract Purpose This study aimed to evaluate the inherent and after cyclic loading fracture strength of implant‐supported cantilevered fixed prostheses fabricated from recently introduced additively manufactured (AM) and subtractively manufactured (SM) materials, considering variations in prosthesis height.
Mustafa Borga Dönmez   +6 more
wiley   +1 more source

Relationship between bruxism and different types of mechanical complications in implant‐supported prosthesis: A systematic review with meta‐analysis

open access: yesJournal of Prosthodontics, EarlyView.
Abstract Purpose This review aimed to assess the prevalence and association between bruxism and different types of mechanical complications in implant‐supported prosthesis, which is missing in the literature. Methods A systematic review with meta‐analysis was carried out in PubMed/Medline, Web of Science, Embase, Cochrane Library, LILACS, and Scopus ...
Rafael de Araujo Vidal   +5 more
wiley   +1 more source
ceramics
dental porcelain
humans
crowns
dental materials
materials testing
metal ceramic alloys
surface properties
dental prosthesis design
previous   22  23  24  25  26  

Home - About - Disclaimer - Privacy