Results 101 to 110 of about 5,813 (224)

Biomechanics of the implant‐supported full arch fixed complete denture manufactured by milling and injection techniques: An experimental and FEA study

Journal of Prosthodontics, EarlyView.
Abstract Purpose This study aims to characterize the mechanical properties of implant‐supported full arch fixed complete dentures manufactured by milling and injection techniques. Materials and Methods Twenty‐two samples with milling and injection manufacturing techniques were fabricated.
Mustafa Gürkan, Ovul Kumbuloglu, Makbule Heval Şahan, Mert Narin, Halis Kandaş, Yusuf Arman, Hasan Yildiz, Mahmut Pekedis   +7 more
wiley   +1 more source

Effect of angulation between multi‐unit abutments on trueness of photogrammetry systems

Journal of Prosthodontics, EarlyView.
Abstract Purpose To compare the trueness between conventional impressions (CI) and photogrammetry for full‐arch implant‐supported prosthesis and to evaluate the effect of increased inter‐abutment angulation on trueness. Materials and Methods Three edentulous reference models containing four multiunit abutment (MUA) replicas with different inter ...
Abdulelah Andejani Bin Farrah, Leila Ahmadian, David Shonberg, Rand Harlow, Bin Yang   +4 more
wiley   +1 more source

Effect of surface treatments on the bond strength between additively manufactured or injection‐molded high‐performance polymers and titanium

Journal of Prosthodontics, EarlyView.
Abstract Purpose To investigate the effect of surface treatment and fabrication techniques of high‐performance polymers on their shear bond strength (SBS) to grade IV titanium. Materials and Methods A total of 120 pre‐milled titanium abutments were sectioned.
Ahmet Serkan Küçükekenci, Doğu Ömür Dede, Oğuz Süleyman Özdemir, Burak Yilmaz   +3 more
wiley   +1 more source

Effect of substructure fabrication method and design on the fracture resistance properties of metal–ceramic restorations

Journal of Prosthodontics, EarlyView.
Abstract Purpose In metal–ceramic restorations, the substructure fabrication method and design may affect the prognosis of the prosthesis. This study evaluated and compared the fracture resistance of metal–ceramic restorations fabricated with different substructure fabrication methods using two different alloy powders and designs.
Young‐Hoon Lee, Yoon‐Hyuk Huh, Chan‐Jin Park, Lee‐Ra Cho, Kyung‐Ho Ko   +4 more
wiley   +1 more source

Fracture load and retention of milled interim implant restorations fabricated on three types of abutments and two implant diameters: An in vitro study

Journal of Prosthodontics, EarlyView.
ABSTRACT Purpose To evaluate the fracture load and retention of subtractively manufactured interim restorations for single‐unit implants of two diameters, using three interim abutment types: stock abutments, titanium base (Ti‐base) abutments, and pre‐milled polymethyl methacrylate (PMMA) abutments.
Dong‐Hun Lee, Carme Riera, Qiucen Wan, Nareudee Limpuangthip, Jae‐Hyun Lee, Sang J. Lee   +5 more
wiley   +1 more source

Influence of prosthesis type and intraoral scanner‐based extraoral scanning protocol on the passive fit of CAD‐CAM verification devices

Journal of Prosthodontics, EarlyView.
Abstract Purpose To evaluate the impact of different complete‐arch digital scanning techniques and prosthesis types on the passive fit of computer‐aided design and computer‐aided manufacturing (CAD‐CAM) verification devices. Materials and Methods Two different maxillary master casts with four multi‐unit abutment (MUA) implant analogs (FP‐1 and FP‐3 ...
Toshiki Nagai, Yusuke Kuroda, Natalie Asavanant, Chao‐Chieh Yang, Dean Morton, Wei‐Shao Lin   +5 more
wiley   +1 more source

Assessment of fit accuracy and retentive strength of additively manufactured zirconia crowns luted to Ti‐base abutments with different resin cements: An in vitro study

Journal of Prosthodontics, EarlyView.
Abstract Purpose This study investigated the influence of cement gap size on the marginal and internal fit, and cement gap size and type on retention of additively manufactured zirconia (AM‐Z) crowns on titanium bases (Ti‐base). Materials and Methods A total of 135 zirconia crowns were designed with three different cement gap sizes: 20 µm, 30 µm, and ...
Rafat Sasany, Sultan Merve Uçar, Burak Yilmaz   +2 more
wiley   +1 more source

Bond strength enhancement for additively manufactured zirconia: Micro‐retentive design approach

Journal of Prosthodontics, EarlyView.
Abstract Purpose To investigate the effect of digitally designed micro‐retention features on the bond strength of additively manufactured (AM) zirconia copings. Materials and Methods Sixty titanium base abutments (NobelParallel, NobelBiocare), pretreated with 50 µm alumina particles were divided into four groups (n = 15 per group); one group with ...
Rama B. Al‐Rashdan, Charles Beard, Fei Liu, Berna Saglik, Bashar A. Al‐Rashdan, Khaled Q. Al Hamad   +5 more
wiley   +1 more source

Effect of material, prosthesis height, and aging on the fracture strength of additively and subtractively manufactured implant‐supported cantilevered prostheses

Journal of Prosthodontics, EarlyView.
Abstract Purpose This study aimed to evaluate the inherent and after cyclic loading fracture strength of implant‐supported cantilevered fixed prostheses fabricated from recently introduced additively manufactured (AM) and subtractively manufactured (SM) materials, considering variations in prosthesis height.
Mustafa Borga Dönmez, Paola Maldonado, Çiğdem Kahveci, Ahmet Orgev, Marta Revilla‐León, Burak Yilmaz, Gülce Cakmak   +6 more
wiley   +1 more source

Engineering prosthetic axes for unparallel full arch implants by the virtual selection of abutment orientation and angulation. [PDF]

BMC Res Notes
Abdelaziz MS.
europepmc   +1 more source