Results 121 to 130 of about 27,056 (304)

An Advanced Molecularly Imprinted Polymer‐Based Electrochemical Aptasensor for Carbendazim Detection

Advanced Materials Interfaces, EarlyView.
A dual‐recognition electrochemical aptasensor that integrates a molecular imprinted polymer (MIP) and an aptamer is developed for the detection of a common pesticide, carbendazim (CBZ). The resulting sensor exhibits enhanced selectivity toward CBZ over structurally similar compounds and achieves a low detection limit of 1.3 nm, demonstrating its ...
Suthira Pushparajah, Mahnaz Shafiei, Peter J. Mahon, Aimin Yu   +3 more
wiley   +1 more source

Vibration-Based Dip Coating for the Fabrication of Regression Rate Programmable rocket fuel

, 2020
This paper proposes a new manufacturing process of propellant controlling the regression rate through vibration-based multi-layer dip coating. This coating method can fabricate a uniform coating surface in a short period compared to a ...
Kwak, Hyunsu, LEE, ANNA, Lee, Jeongrak, Lee, Byungho   +3 more
core  

Photoresist dip coating on thin film networks. Final report

, 1980
Application of liquid photoresist by dip coating was investigated as potentially more reliable and repeatable than the current roller coating process.
Hughs, R. W., Barner, G. E.
core   +1 more source

Stabilizing Electrochemical Interfaces With Multifunctional Cobalt Nitride Layers

Advanced Materials Interfaces, EarlyView.
Cobalt nitrides emerged recently as an interesting class of earth‐abundant oxygen evolution catalysts. Herein, plasma‐enhanced atomic layer deposition is used to synthesize multifunctional cobalt nitride layers that simultaneously protect and catalytically activate photoelectrode surfaces.
Matthias Kuhl, Lukas A. Kohlmaier, Sergej Levashov, Lukas M. Wolz, Sonja Matich, Nina Miller, Johannes Dittloff, Johanna Eichhorn   +7 more
wiley   +1 more source

Design and fabrication of a low-cost and programmable dip coating machine. [PDF]

HardwareX, 2022
Dunlap C, Featherstone S, Smith M, Vu M, Williams A, Bailey J, Hu H.   +6 more
europepmc   +1 more source

Tubular cathode prepared by a dip-coating method for low temperature DMFC

, 2006
A novel tubular cathode for the direct methanol fuel cell (DMFC) is proposed, based on a tubular titanium mesh. A dip-coating method has been developed for its fabrication.
Christensen, P.A., 邵志刚, Lin, W.-F., Lin, W. -F., Shoo, Z.-G., Shao, Z. -G., Zhang, H., Zhu, F., Christensen, P. A.   +8 more
core   +1 more source

Multilayered Digital Microfluidic Chip for Cell‐Based Assays

Advanced Materials Interfaces, EarlyView.
A multilayered digital microfluidic (mDMF) chip architecture is introduced to improve throughput and robustness in cell‐based assays. By multilayering electrode components and dielectric layers on glass, this design significantly reduces actuation voltage, maintains reliability, and enables expansion of the operational area with minimum current leakage.
Mert Ozden, Oksana K. Savchak, Burcu Gumuscu   +2 more
wiley   +1 more source

Improving Conformality in Selective Dip-Coating of Patterned Planar Substrates

, 2007
The capillarity-driven self-assembly of small chips onto planar carrier substrates heavily relies on the selective deposition of thin fluid films onpatterned binding sites.
Ruythooren, Wouter, Baert, Kris, Van Hoof, Chris, Mastrangeli, Massimo, Celis, J.-P   +4 more
core  

Ti3C2Tx MXene/Silver Composite Foams For Lightweight, High‐Performance Electromagnetic Interference Shielding and Joule Heating

Advanced Materials Interfaces, EarlyView.
Ultrathin MXene/EMF composite foams achieve a specific shielding efficiency of 749.6 dB.dB·cm3$\mathrm{dB}\cdot {\mathrm{cm}}^{3}$/g, while the silver‐enhanced MXene/Ag/EMF reaches 81.4 dB shielding effectiveness at just 1.0 mm thickness. Both composites exhibit rapid Joule heating, retain stability up to 250∘C$^\circ{\rm C}$, and withstand 1000 ...
Abdullah A. Mahmood, Mingxuan Li, Vahid Rad, Mehdi Zarei, Chen‐Yu Yeh, Masoud Soroush, Guangyong Li, Paul W. Leu   +7 more
wiley   +1 more source

Formulation and evaluation of curcumin coated central venous catheters in the eradication of catheter-related blood stream infections

Journal of Applied Pharmaceutical Research
Background: Biofilm formation on catheters after implantation, leading to the development of catheter-related bloodstream infections, is a significant concern with the usage of vascular catheters, leading to the death of hospitalized patients.
Nissara Ahammed, Revathi Sundaramoorthi, Venkatesh Dinnekere Puttegowda, Umashankar Chikkanna   +3 more
doaj   +1 more source