Results 1 to 10 of about 375 (159)
Effects of the secondary shot in the double shot peening process on the residual compressive stress distribution of Ti–6Al–4V [PDF]
Heliyon, 2022 Double shot peening is the development of shot peening by shooting large media as a first shot and re-shooting again with smaller media as a second shot in order to achieve high residual compressive stress and hardness at the surface, while the in-depth ...
Goratouch Ongtrakulkij +3 more
doaj +7 more sources
Fatigue strength improvement of Mg alloy AZ61 by double ultrasonic shot peening
Nihon Kikai Gakkai ronbunshu, 2016 Rotary bending fatigue tests using magnesium alloy AZ61 treated by double ultrasonic shot peening (USP) and peening under other conditions were performed to investigate the effect of shot peening (SP) on the fatigue behavior and to obtain high and stable
Toshifumi KAKIUCHI +4 more
doaj +5 more sources
Investigation into the effects of laser shock peening as a post treatment to laser impact welding
Materials & Design, 2021 In this work, laser shock peening (or simply laser peening) is investigated for the first time as a post welding treatment for dissimilar foils joined via the fully-mechanical, high-velocity laser impact welding technique. Single and double laser peening
Sepehr Sadeh, Arif Malik
doaj +2 more sources
Fatigue Strength Enhancement of Butt Welds by Means of Shot Peening and Clean Blasting [PDF]
Metals, 2019 Shot peening is a mechanical surface treatment to improve the fatigue strength of metallic components. Similarities exist between regular shot peening and conventional industrial clean blasting. However, the main difference between these two processes is
Jonas Hensel +3 more
doaj +2 more sources
Tooth Root Bending Fatigue Performance of Shot Peening TM210A Steel Spur Gear
Advances in Materials Science and Engineering, 2022 Tooth root bending fatigue performance is the primary consideration in gear design. To investigate the difference between the tooth root fatigue performances of shot peened and base material, TM210A steel gears and double-tooth pulsating bending fatigue ...
H. J. Xu +3 more
doaj +2 more sources
Shot peening impact on fatigue scattered structural elements of vehicles [PDF]
Scientific Journal of Silesian University of Technology. Series Transport, 2015 The theme of this work is to know about the current state of knowledge in the field of materials processing using a distributed circular pellet of shot peening steel surfaces.
Sebastian KAMIŃSKI, Tadeusz ŁAGODA
doaj +3 more sources
Influence of shot peening on tensile properties of DD6 single crystal superalloy
Cailiao gongcheng, 2019 The influence of cast steel shot-peening on the tensile properties of the second generation single crystal superalloy DD6 under 500, 600,650℃ was investigated by SEM, X-ray and TEM.
HAN Mei +5 more
doaj +2 more sources
Surface Topography: Metrology and Properties, 2016 The effects of different shot peening conditions such as pressure (from 68.9–551.6 kPa), media type (media S230 and S110) and double shot peening on the microstructure, mechanical and tribological properties of shot peened AISI 4340 low-alloy steels, were systematically investigated.
Pham Quang Trung +2 more
openaire +2 more sources
International Journal of Technology, 2016 In this study, H13 tool steel and Cr-Mo-V steel were treated by two different types of surface treatments, i.e. double shot peening with nitriding and single shot peening.
Myrna Ariati +2 more
doaj +2 more sources
Jixie chuandongObjectiveTo address the issues of uneven residual compressive stress distribution and high surface roughness in gears after shot peening, this study investigates the effect of double shot peening on the surface integrity of 18CrNiMo7-6 carburized gear ...
WANG Zhen, SUN Hao, WANG Guohao
doaj +2 more sources