Results 111 to 120 of about 1,386 (221)

PROPOSAL OF ANALYTICAL MODELS OF WOODEN DOWEL SHEAR JOINT : Single shear joint with slender-type round dowel

open access: yesJournal of Structural and Construction Engineering (Transactions of AIJ), 2007
Hiroshi FUKUYAMA   +4 more
openaire   +2 more sources

INVESTIGATION ON TENSILE STRENGTH OF DOWEL JOINT IN PARTICLEBOARD FASTENING

open access: yesتحقیقات علوم چوب و کاغذ ایران, 2005
Poplar trees are classified as a fast growth trees and because of short rotation period, and suitable technical properties, are considered by pulp and paper making industries. In this study, physical and anatomical properties and pulp and paper of three colons of poplar trees, populous Alba. L.
Habib Nori   +2 more
openaire   +1 more source

Flexural Tests for Efficiency Evaluation of Spike Anchors on CFRP-Strengthened Concrete. [PDF]

open access: yesMaterials (Basel), 2022
Llauradó PV   +4 more
europepmc   +1 more source

Performance Testing of Experimental Dowel Bar Retrofit Designs Part 1 - Initial Testing

open access: yes, 2003
An area of concern common to portland cement concrete (PCC) pavements is load transfer across joints and cracks. The current design standard for load transfer in new jointed PCC pavements and the rehabilitation of old PCC pavement is to place steel dowel
Schultz, Arturo E.   +2 more
core  

Structural joints with glued-in hardwood dowels

open access: yesStructural joints with glued-in hardwood dowels
Joints with axially loaded glued-in hardwood dowels were studied. A dowel whose length is ten times as long as diameter is glued into a loose-fit hole. The dowelhole clearance is filled with flexible polyuretane adhesive to relieve shear-stress concentration along a bond line.
openaire  

Assessment and reinforcement of existing dowel-type joints

open access: yes, 2019
Joints in timber structures have an evident effect on the behaviour of the structure in general. The failure mechanism of timber joints with mechanical fasteners among other things depends on the geometry of the joint and the type of fastener. Substantially, under compressive stresses, timber as a material may be loaded far over its elastic limit.
openaire   +1 more source

Dowel type joints – Influence of moisture changes and dowel surface smoothness

open access: yes, 2007
The paper gives an overview of ongoing research and research performed during recent years at Växjö University, Sweden, within a PhD study. Results from various experimental and numerical studies relating to the behaviour of dowel-type joints are ...
Serrano, Erik,, Sjödin, Johan,
core  

Optimum dowel spacing for corner joints in 32-mm cabinet construction

open access: yes, 2005
The increased utilization of European 32-min cabinet construction in the Turkish furniture industry has highlighted the need for practical strength performance evaluation of case construction.
Tankut, AN
core  

Numerical determination of the slip modulus of dowel-type timber joints

open access: yes
Modeling timber joints it is essential to know the stiffness of the connections. In some cases the prescriptions of the standards contain only general approach without considering significant effects.
Erdődi, László, Bódi, István
core   +1 more source

Home - About - Disclaimer - Privacy