Results 181 to 190 of about 9,449 (231)

Nonlinear Stochastic Drill-String Vibrations

Journal of Vibration and Acoustics, 2002
Lateral vibrations of drill-strings used in oil well operations are considered. A finite elements based discretization procedure leads to a nonlinear dynamic system which is used to represent the drill-string inertia and stiffness characteristics, as well as the elasticity of the wall of the well.
P. D. Spanos   +2 more
openaire   +1 more source

Stick-Slip Vibration of Drill Strings

Journal of Engineering for Industry, 1991
The stick-slip vibration is introduced as a new mechanism to explain the large amplitude torsional oscillation of the drill strings in oil and gas well drillings. A record of field data is identified and simulated according to the new mechanism. The analytical results derived from the numerical simulation agree with the field data with 95.6 percent ...
Yu-Hwa Wang, Yao-Qun Lin
openaire   +1 more source

An Experimental Study of Drill-String Vibration

Journal of Engineering for Industry, 1960
This paper describes equipment which has been developed for the measurement of axial force, torque, and axial and rotational motions at the top of a drill string. Measurements made in two wells with this equipment represent the first time these quantities have been recorded during drilling.
I. Finnie, J. J. Bailey
openaire   +1 more source

Drill String Vibration Mitigation During Simultaneous Drilling and Hole Enlargement

SPE/IADC Drilling Conference and Exhibition, 2009
Abstract Drill string vibrations (torsional, axial, and lateral uncontrolled movements) can create issues with equipment, drilling performance and wellbore quality. With respect to equipment, prolonged excessive drill string vibration exposure can lead to fatigue failure such as drill string ‘twist off’, downhole tool breakage, shorter ...
Stefano Mancini   +3 more
openaire   +1 more source

An Analytical Study of Drill-String Vibration

Journal of Engineering for Industry, 1960
Longitudinal and torsional vibrations in a drill string consisting of drill pipe and collars, and the boundary conditions at the ends of the string, are discussed. A trial-and-error method of solution for the natural frequencies is demonstrated. Since it is very lengthy, certain useful charts are then derived, and a graphical method of solution for the
J. J. Bailey, I. Finnie
openaire   +1 more source

Research and Analysis of Drilling String Vibration Signals

2020 IEEE International Conference on Mechatronics and Automation (ICMA), 2020
Drilling tools are the main components of the drilling system, including drill bits and drill rods. During the drilling process, due to the collision between the drill bit and different formations, the drill string often vibrates, which causes damage to the drill bit and has a serious negative impact on drilling.
Bilin Li, Yi Gao, Ruibing Li
openaire   +1 more source

Longitudinal natural vibration of ultra-long drill string during offshore drilling

Ocean Engineering, 2018
Abstract Offshore drilling with ultra-long drill strings (i.e., longer than 10,000 m) creates a new class of technical challenges, such as dynamic variation of weight on bit (WOB). This article investigates observational data obtained from a drilling program conducted by the scientific drilling vessel Chikyu using an 8000 m drill string, which is ...
Ryota Wada   +4 more
openaire   +1 more source

Home - About - Disclaimer - Privacy