Results 181 to 190 of about 210,892 (236)
Some of the next articles are maybe not open access.

Design Consideration for Composite Drilling Riser

Offshore Technology Conference, 1999
Abstract High pressure drilling risers represent the most challenging application for composite materials in the offshore industry. Therefore, their successful field qualification should serve to eliminate the emotional barriers and pave the way for the broad usage of composites in similar but less demanding ...
Mamdouh M. Salama   +4 more
openaire   +1 more source

Riser Modeling Scheme for a Load-Sharing Marine Drilling Riser

Volume 3: Pipeline and Riser Technology; CFD and VIV, 2007
Typical riser analysis for a marine drilling riser using the conventional composite modeling scheme will have only one line of elements mathematically representing riser pipe and auxiliary lines. The mass and weight of the riser system may be properly modeled. It is up to the analyst to include auxiliary lines’ stiffness, bending and/or axial. The rule
Roger Chang, Ed Fisher
openaire   +1 more source

Titanium Drilling Risers—Application and Qualification

Journal of Offshore Mechanics and Arctic Engineering, 1999
Abstract Titanium alloy Ti-6AI-4V ELI is selected for a high-pressure drilling riser application due to its high specific strength, corrosion resistance, and favorable elastic properties. The qualification of this titanium alloy requires assessing its resistance to hydrogen embrittlement and stress corrosion cracking due to seawater with/
Mamdouh M. Salama   +2 more
openaire   +1 more source

Drilling Riser VIV – Fact or Fiction?

IADC/SPE Drilling Conference and Exhibition, 2010
Abstract Vortex induced vibration (VIV) of deepwater drilling risers due to steady current flow does occur. This has been demonstrated by BP, who have collected a large amount of drilling riser field measurements over the last 10 years [3].
Michael A. Tognarelli   +2 more
openaire   +1 more source

Study on the Effects of Drilling Riser Attachments

Volume 5: Pipelines, Risers, and Subsea Systems, 2018
A drilling riser is a conduit that provides a temporary extension of a subsea oil well to a surface drilling facility. The drilling risers are used with subsea BOP and generally used by floating drilling vessels. When used at deeper depths, the drilling riser must be tensioned to maintain stability.
Sung-Je Lee   +5 more
openaire   +1 more source

Advancements in Deepwater Drilling Riser Modelling

Volume 6B: Pipeline and Riser Technology, 2014
Experience with modern ultra-deepwater capable drilling vessels and their associated marine riser tensioner systems has led to increased concerns over tensioner load variations in extreme environments. Modern drilling riser tensioners are complex hydro-pneumatic systems whereby the tension applied at the slip-ring can vary significantly with tensioner ...
Paul Bohan, Donogh Lang
openaire   +1 more source

A Fast Coupling for a Deepwater Drilling Riser

SPE Annual Technical Conference and Exhibition, 1984
ABSTRACT ELF AQUITAINE and TOTAL have operated the D.P. drill ship Discoverer Seven Seas in the Mediterranean Sea, temporarily establishing a new world water depth record on GLP1 well located south of Marseilles in 5 624 ft of water. The success of this well and the following well GLP2 in the same area can be partially ...
Le J.P., J. Guesnon, L.M. Soleille
openaire   +1 more source

Natural Frequencies of Marine Drilling Risers

Journal of Petroleum Technology, 1976
This paper gives the mathematical basis for determining natural frequencies and corresponding mode shapes for marine drilling risers. Numerical results relate natural frequencies to riser parameters; the data cover risers operating within 600 ft of water. An approximate method is given for establishing marine-riser natural frequencies.
D.W. Dareing, T. Huang
openaire   +1 more source

Concentric Drilling Risers for Ultra Deepwater

IADC/SPE Drilling Conference, 1998
Abstract Use of a higher pressure rated riser run inside the marine drilling riser would provide floating rigs with some advantages enjoyed by fixed rigs; the potential to drill underbalanced or near balanced, improved gas handling capability, improved well testing capability, expanded kick control capabilities and ...
R.P. Herrmann   +2 more
openaire   +1 more source

Field Operation of Drilling Marine Risers

Journal of Petroleum Technology, 1980
Structural analysis techniques have been used since the 1950's to predict stresses in marine riser systems. However, little effort has been focused on the input design criteria, their interpretation, and field application. Taking into consideration the rig's characteristics, mooring capability, and riser system, this paper presents design and operating
Mark A. Childers, E.B. Martin
openaire   +1 more source

Home - About - Disclaimer - Privacy