Results 331 to 340 of about 4,804,754 (398)
Some of the next articles are maybe not open access.
Friction coefficient influence on the engagement uncertainty in dry-clutch AMT
2016 American Control Conference (ACC), 2016This paper focuses on control of automotive gearbox based on dry-clutch architecture. Such a system is widely spread as engagement device in Automated Manual Transmissions (AMTs) and Dual-Clutch Transmissions (DCT) to manage the energy flow from the engine to the vehicle wheels.
PISATURO, MARIO +2 more
openaire +2 more sources
, 2020
In this study, thin layer drying experiments of direct and indirect natural convection solar drying of wastewater sewage sludge in Algeria were conducted.
Billal Ameri +2 more
semanticscholar +1 more source
In this study, thin layer drying experiments of direct and indirect natural convection solar drying of wastewater sewage sludge in Algeria were conducted.
Billal Ameri +2 more
semanticscholar +1 more source
, 2019
In the present work, an indirect type solar dryer (ITSD) was developed and its air flow was encouraged by inlet fans that operated by solar photovoltaic (PV) panels.
M. Goud +3 more
semanticscholar +1 more source
In the present work, an indirect type solar dryer (ITSD) was developed and its air flow was encouraged by inlet fans that operated by solar photovoltaic (PV) panels.
M. Goud +3 more
semanticscholar +1 more source
Diffusion coefficients for predicting rice drying behaviour
Journal of Agricultural Engineering Research, 1982Abstract Recent efforts to characterize moisture diffusion in rice are summarized. New equations for temperature dependent liquid diffusion coefficients for rough and brown rice are presented. Result sindicate that the resistance to moisture movement is greater in rough rice than in brown rice.
J.F. Steffe, R.P. Singh
openaire +1 more source
Experimental and theoretical analysis of drying grapes under an indirect solar dryer and in open sun
Innovative Food Science & Emerging Technologies, 2018In the present work, the drying behavior of grapes under open sun and into indirect solar dryer was studied. The indirect solar dryer was designed in the Solar Energy and Environment Laboratory of Mohammed V University, Rabat, Morocco.
H. Essalhi +3 more
semanticscholar +1 more source
Mass Transfer Coefficients and Drying Rates in Through Air Drying: Part II
Drying Technology, 2009In this study experimental results and analysis are given of convective heat and mass transfer in the drying of tissue and towel products (25 and 50 g/m2 basis weight) under commercially realistic conditions under through flow. Parameter effects on drying rate include process variables such as refining, shaping, commercial forming, initial moisture ...
A. Modak +3 more
openaire +1 more source
Influence of pulsed electric field (PEF) pre-treatment on the convective drying kinetics of onions
Journal of Food Engineering, 2018This work discusses the effect of pulsed electric field (PEF) parameters on the convective drying process of fresh onions. First, the PEF treatment parameters and their influence on the cell disruption were investigated by applying various PEF settings ...
R. Ostermeier +4 more
semanticscholar +1 more source
Experimental evaluation of beef drying kinetics in a solar tunnel dryer
Renewable Energy, 2019This study focused on the experimental analysis on drying kinetics of beef in a solar tunnel dryer. During the drying process the parameters of drying air were monitored. Experimental drying curves were then determined.
Eunice A. Mewa +3 more
semanticscholar +1 more source
Pressure Coefficient in Dam-Break Flows of Dry Granular Matter
Journal of Hydraulic Engineering, 2013AbstractThe propagation of dry granular flows, such as rock and snow avalanches, can be described by depth-averaged models. Different from classical shallow-water equations, these models take into account the anisotropy of normal stresses inside the flowing pile through using an earth pressure coefficient in the pressure term.
SARNO, LUCA +3 more
openaire +3 more sources
A Statistical Approach for Improving the Accuracy of Dry Friction Coefficient Measurement
IEEE Transactions on Instrumentation and Measurement, 2019Tribological tests are adopted to estimate the kinetic friction coefficient of the material of interest according to the ASTM standard. Typically, for the measurement process, several replicas as well as a postprocessing data treatment are necessary to take into account the observed casual variability of the measurand.
Consolatina Liguori +3 more
openaire +2 more sources