Results 141 to 150 of about 2,697,561 (249)

Transition of ductile and brittle fracture during DWTT by FEM

open access: yes, 2013
Globally, steel pipelines are widely used to transport energy in the form of liquid petroleum and natural gas. The steel used in the manufacture of these pipelines must have high strength and toughness, and high resistance to fracture.
YouYou Wu (20191326)   +5 more
core   +1 more source

Enhancing the Tensile Properties and Ductile-Brittle Transition Behavior of the EN S355 Grade Rolled Steel via Cost-Saving Processing Routes. [PDF]

open access: yesMaterials (Basel)
Zurnadzhy V   +7 more
europepmc   +1 more source

Nanoscale fracture mechanisms in defective α‐quartz induced by compression: Insights from molecular dynamics simulation

open access: yesDeep Underground Science and Engineering, EarlyView.
Rock fracture can ultimately be traced to atomic bond breakage. Taking quartz as a representative mineral, this paper employs molecular dynamics to identify the crack initiation and propagation mechanisms for single‐hole cases, as well as crack coalescence modes between double holes under compression, providing a physical basis for multiscale modeling ...
Sheng Li   +4 more
wiley   +1 more source

Three‐dimensional hardening‐softening elastoplastic modeling of nondilatant rock‐like materials with nonorthogonal flow rule

open access: yesDeep Underground Science and Engineering, EarlyView.
A novel three‐dimensional elastoplastic constitutive model is developed for nondilatant rock‐like materials under true‐triaxial stress conditions. A piecewise yield function captures the evolution of 3D yield surfaces during hardening‐softening processes, while a fractional‐order‐controlled nonorthogonal flow rule enables flexible regulation of ...
Jiacun Liu   +4 more
wiley   +1 more source

Strength–stiffness coupling mechanism governing grout‐rock interface performance and anchorage capacity

open access: yesDeep Underground Science and Engineering, EarlyView.
This study reveals how the coupled evolution of grout–rock interfacial shear strength and stiffness governs rock‐bolt anchorage performance. Direct shear tests combined with digital image correlation were performed on four grout systems modified with silica fume or styrene–acrylate emulsion.
Xiaoyun Shu   +5 more
wiley   +1 more source

The synergistic effect and mechanical properties of a composite support system with a steel‐strand‐reinforced composite steel mesh and a flexible shotcrete layer

open access: yesDeep Underground Science and Engineering, EarlyView.
This study proposes a composite tunnel support system integrating a steel strand‐reinforced composite steel mesh (SSRCM) with a flexible shotcrete layer (FSL) for fractured, highly stressed rock masses. Material tests identified 30% polymer emulsion as the optimum FSL formulation.
Xianda Feng   +4 more
wiley   +1 more source

Lithium Metal Anode Fabrication: Methods, Challenges, and Strategies

open access: yesEcoEnergy, EarlyView.
Schematic illustration of four representative fabrication techniques for thin lithium metal anodes: extrusion, molten lithium infusion, electroplating, and physical vapor deposition (PVD). ABSTRACT The pursuit of ultra‐high energy‐dense lithium‐metal batteries (LMBs) has reignited the drive to fabricate ultrathin high‐quality lithium metal anodes. This
Ji Hyun Baek, Mi Ji Kang, Ho Won Jang
wiley   +1 more source

Hybrid Graphene‐Carbon Nanotube (CNT) Conductive Additives System for Regulating Polytetrafluoroethylene (PTFE) Fibrillization Toward High‐Energy‐Density LiFePO4 Dry Cathodes

open access: yesEcoEnergy, EarlyView.
Graphene sheets were introduced as low‐friction regulators to control PTFE fibrillization during dry electrode processing. Positioned between LFP particles and PTFE, graphene mitigates transmission of shear stress, enabling the formation of thick, long, and continuous PTFE fiber networks.
Jiwoon Kim   +5 more
wiley   +1 more source

Synergistic Design of Composite Ionogels With Enhanced Thermoelectric Properties, Mechanical Stretchability, and Sustainable Recyclability

open access: yesENERGY &ENVIRONMENTAL MATERIALS, EarlyView.
While flexible TE devices hold promise for converting low‐grade waste heat (e.g., from human skin or electronics) into usable electricity, existing materials suffer from three major limitations: 1) poor mechanical stretchability (failing to match human skin's elongation, ~20–30%), limiting wearability; 2) tradeoffs between thermoelectric efficiency (e ...
Mingqi Liu   +5 more
wiley   +1 more source

Home - About - Disclaimer - Privacy