Results 81 to 90 of about 4,428 (225)
Mineral carbonation of ceramic brick at low pressure and room temperature. A simulation study for a superficial CO2 store using a common clay as sealing material [PDF]
, 2018 This research explores the possibilities of CO2 sequestration on ceramic bricks in a short time and at surface conditions. The experiment was carried out in a specially designed reaction chamber, filled with brick wastes and sealed with common clays. The
Aparicio Fernández, Patricia +2 more
core +1 more source
Journal of the American Ceramic Society, Volume 108, Issue 10, October 2025.Abstract The interaction behavior between iron oxide‐bearing slags and carbon‐bonded MgO refractory (MgO‐C) containing calcium magnesium aluminate (CMA) was investigated at 1400°C, 1500°C, and 1600°C. After the iron oxide was reduced by the carbon from the MgO‐C refractory, a significant amount of MgO and metallic iron was observed to precipitate and ...
Xingwen Wei +6 more
wiley +1 more source
Performing self-compacting concrete with electric arc-furnace slag as aggregates
MATEC Web of Conferences, 2017 The electric steelmaking industry is of great importance to the economy of the Basque Country (Spain). In all, 600,000 tons of electric arc-furnace (EAF) slag are produced every year; a by-product that this research group believes can be transformed into
Santamaría Amaia +4 more
doaj +1 more source
Study of the Suitability of Different Types of Slag and Its Influence on the Quality of Green Grouts Obtained by Partial Replacement of Cement [PDF]
, 2019 This paper is part of a research line focused on the reduction of the use of cement in the industry. In this work, the study of work methodologies for the manufacture of green cementitious grout mixtures is studied. Grout is widely used in construction
Garcia-Manrique, Jose Manuel +3 more
core +3 more sources
EAF slag as filler in vulcanized rubber
, 2020 Italy with an annual production of 20 million tons is the leading producer of electric arc furnace (EAF) steel in Europe. The geographical distribution of EAF steel producers is concentrated in Lombardy, therefore the macro sector of metallurgical industry is related to that of vulcanized rubber as it is located in the same geographical area.
Anna Gobetti +4 more
openaire +1 more source
steel research international, Volume 96, Issue 8, August 2025.A novel, hybrid, data‐driven model is developed to assist steelmakers in minimizing production interruptions caused by submerged entry nozzle (SEN) clogging. The modeling architecture is specifically designed to analyze variations in steel chemistry and stopper rod changes, employing a data‐driven approach combined with metallurgical and industrial ...
Sudhanshu Kuthe +2 more
wiley +1 more source
Case Studies in Construction Materials, 2019 On the one hand, several million tons of steel slag is produced annually as the by-product of the steel industry in Iran and other countries and are deposited in landfills without any use, occupy vast areas, and cause environmental hazards.
Mojtaba Alinezhad, Ali Sahaf
doaj +1 more source
Mechanism of Vanadium Leaching during Surface Weathering of Basic Oxygen Furnace Steel Slag Blocks: A Microfocus X-ray Absorption Spectroscopy and Electron Microscopy Study [PDF]
, 2017 © 2017 American Chemical Society. Basic oxygen furnace (BOF) steelmaking slag is enriched in potentially toxic V which may become mobilized in high pH leachate during weathering.
Allison J. D. +11 more
core +4 more sources
Plant Treatments of EAF Slag for its Use as Construction Materials
Advanced Materials Research, 2013 At the steel plant of Höganäs Sweden AB, different steel grades were produced using an Electric Arc Furnaces (EAF). The slag tapped by the EAF often disintegrated during cooling. Slag fines from the disintegration are difficult to handle and to use as materials in construction.
Yang, Qixing +6 more
openaire +3 more sources
Influence of Carbon Material Properties on Slag‐Foaming Dynamics in Electric Arc Furnaces: A Review
steel research international, Volume 96, Issue 8, August 2025.This article examines how the properties of the carbon materials affect the slag foaming, emphasizing the need for strategies to improve the effectiveness of biochar, such as pelletizing or blending with coke. Biocoke appears as promising but underexplored option for enhancing slag foaming.
Lina Kieush, Johannes Schenk
wiley +1 more source