Results 21 to 30 of about 10,304 (289)
Applied Sciences, 2023 Hydrogen permeation reduces a material’s properties and increases the risk of brittle fracture, which causes a potential safety hazard. A workpiece’s hydrogen permeation resistance could be improved by improving its surface integrity through surface ...
Zhiyi Leng +6 more
doaj +1 more source
Internal Friction Study on the Influence of Pre-Deformation on Hydrogen Embrittlement Sensitivity of Dual-Phase Steel [PDF]
Archives of Metallurgy and Materials, 2022 In this study, an electrochemical method was used to permeate hydrogen through annealed DP590 steel under various pre-strain conditions (0-15%). Stress-strain and internal friction-temperature curves of the dual phase (DP) steel were obtained from slow ...
Qihang Pang +5 more
doaj +1 more source
Hydrogen Embrittlement of CoCrFeMnNi High-Entropy Alloy Compared with 304 and IN718 Alloys
Metals, 2022 The hydrogen embrittlement (HE) behaviors of a CoCrFeMnNi high-entropy alloy (HEA), 304 stainless steel (304SS) and IN718 alloys were studied and compared via electrochemical hydrogen pre-charging, slow strain rate tensile tests, and fracture surface ...
Zheng Feng +4 more
doaj +1 more source
Investigating electrochemical charging conditions equivalent to hydrogen gas exposure of X65 pipeline steel [PDF]
, 2023 In this study, we systematically investigate electrochemical hydrogen charging conditions equivalent to hydrogen gas pressures relevant for hydrogen transportation in X65 pipeline steel. By performing hydrogen gas permeation, a relationship for Sieverts'
Wang, Dong +4 more
core +1 more source
Irreversible hydrogen embrittlement study of B1500HS high strength boron steel
Materials & Design, 2021 The reversible/irreversible recovery of mechanical properties, and the microstructure characteristics of a typical hot-stamped steel B1500HS have been studied under different conditions of hydrogen permeation.
Yang Chen +7 more
doaj +1 more source
AIP Advances, 2023 In order to investigate the hydrogen permeation behavior of 316L stainless steel during the microstructural evolution induced by laser peening (LP), an electrochemical hydrogen charging system for initial hydrogen charging of LPed and non-LPed specimen ...
Yunfeng Jiang +7 more
doaj +1 more source
International Journal of Hydrogen Energy, 2021 Abstract We demonstrate that the combination of hydrogen release from a Liquid Organic Hydrogen Carrier (LOHC) system with electrochemical hydrogen compression (EHC) provides three decisive advantages over the state-of-the-art hydrogen provision from such storage system: a) The EHC device produces reduced hydrogen pressure on its suction side ...
Mrusek, Stephan +4 more
openaire +2 more sources
Hydrogen transport and embrittlement in 300 M and AerMet100 ultra high strength steels [PDF]
, 2010 This paper describes how hydrogen transport affects the severity of hydrogen embrittlement in 300 M and AerMet100 ultra high strength steels. Slow strain rate tests were carried out on specimens coated with electrodeposited cadmium and aluminium-based
Robinson, M. J. +1 more
core +1 more source
Microstructure and Hydrogen Embrittlement Sensitivity of 38CrMoAlNitriding Steel Treated by Vacuum Carburizing [PDF]
Cailiao Baohu, 2021 In order to meet the requirements of material properties for automotive lightweight, 38CrMoAl nitriding steel for gear was selected as the test material.
ZHAO Hua-rui, DING Yan-xia
doaj +1 more source
Combined Kelvin probe force microscopy and secondary ion mass spectrometry for hydrogen detection in corroded 2024 aluminium alloy [PDF]
, 2013 The capability of Kelvin probe force microscopy (KFM) to detect and locate hydrogen in corroded 2024 aluminium alloy was demonstrated. Hydrogen was introduced inside the 2024 alloy following a cyclic corrosion test consisting of cycles of immersion in 1 ...
Blanc, Christine +5 more
core +1 more source