Investigation of Tantalum Recycling by Electron Beam Melting [PDF]
Metals, 2016 Investigations are carried out and obtained experimental and theoretical data for tantalum scrap recycling by electron beam melting (EBM) is presented in this paper. Different thermal treatment process conditions are realized and results are discussed. A
Katia Vutova +5 more
doaj +3 more sources
Recycling of Technogenic CoCrMo Alloy by Electron Beam Melting. [PDF]
Materials (Basel), 2022 In the current work, the possibility of the recycling of technogenic CoCrMo material by electron beam melting is investigated. The influence of thermodynamic and kinetic parameters (temperature and melting time) on the behavior of the main components of the alloy (Co, Cr, and Mo) and other elements (Fe, Mn, Si, W, and Nb) present in it, and on the ...
Vutova K +3 more
europepmc +4 more sources
Microstructure and mechanical properties of a high Nb-TiAl alloy fabricated by electron beam melting
Materials & Design, 2018 Electron beam melting (EBM) has been applied to fabricate a high Nb-TiAl alloy with a fully dense microstructure and good tensile properties at both room and high temperatures.
W. Kan, B. Chen, C. Jin, H. Peng, J. Lin
doaj +3 more sources
Purification of Niobium by Electron Beam Melting
High Temperature Materials and Processes, 2016 Pure niobium metal, produced by alumino-thermic reduction of niobium oxide, contains various impurities which need to be reduced to acceptable levels to obtain aerospace grade purity. In the present work, an attempt has been made to refine niobium metals
Sankar M. +4 more
doaj +2 more sources
Additive manufacturing of Ti6Al4V alloy via electron beam melting for the development of implants for the biomedical industry [PDF]
Heliyon, 2021 Libia M Baena
exaly +2 more sources
Melting Depth Characteristics according to Electron Beam Dose for Electron Beam Micro-Hole Drilling [PDF]
한국정밀공학회지, 2021 E-Beam micro-hole drilling features high productivity of 2,000 holes per second and a high aspect ratio of 10 (depth/diameter). It can be used for the fabrication of nozzles and filters that require several holes. The hole-formation mechanism comprises 1)
Joon-Goo Kang +2 more
doaj +1 more source
Estimation of Appropriate Process Parameters for a Plasma Electron Beam Re-Melting Process Using Finite Element Analysis [PDF]
한국정밀공학회지, 2020 Metal additive manufacturing using electron beam melting (EBM) process applies electron beam for heating, sintering, and melting of powders to fabricate a three-dimensional component.
Bih Lii Chua, Ho-Jin Lee, Dong-Gyu Ahn
doaj +1 more source
Electron beam melting toward defects-free titanium alloys [PDF]
MATEC Web of Conferences, 2020 Titanium alloys used for rotating parts of aeroplanes must meet the strict standards of quality, so that it is required to demonstrate that electron beam melting is capable of producing defects-free ingots. However, complete elimination by dissolution of
Funagane H. +4 more
doaj +1 more source
Electron Beam Processing of Sensors Relevant Vacoflux-49 Alloy: Experimental Studies of Thermal Zones and Microstructure [PDF]
Archives of Metallurgy and Materials, 2020 Vacoflux-49 (Fe-49% Co-49% V-2%) is used in torque, sonar and gyroscopic sensors applications due to excellent magnetic properties (high saturation magnetisation, low coercivity and high Curie temperature).
Pawan Kumar, Anshul Yadav, Arvind Kumar
doaj +1 more source
Additive Manufacturing Processes: Selective Laser Melting, Electron Beam Melting and Binder Jetting—Selection Guidelines [PDF]
Materials, 2017 Konda Gokuldoss Prashanth, J Eckert
exaly +2 more sources