Results 81 to 90 of about 4,791 (279)
Nonuniform proppant distribution is fairly common in hydraulic fractures, and different closure behaviors of the propped and unpropped fractures have been observed in lots of physical experiments.
Xia Yan +4 more
doaj +1 more source
3D Printing of Stretchable, Compressible and Conductive Porous Polyurethane for Soft Robotics
A 3D‐printable porous dopamine‐polyurethane acrylate elastomer results in conductive, stretchable, and compressible structures that can be metallized in situ through catechol‐mediated silver reduction. The resulting material function as both compliant soft robot with a and strain sensors without complex assemblies, enabling fully 3D‐printed soft ...
Ouriel Bliah +3 more
wiley +1 more source
Preformed Particle Gel (PPG) have been used as conformance control in mature oil field. Reservoirs ith fractures and very high permeability are candidates for gel treatment. By injecting the PPG in the flooded area, the post waterflooding reached unswept
Bai, Baojun +9 more
core +1 more source
Liquid metal additives are processed in elastomer host resulting in highly conductive and stretchable composites. The material functions as a piezoresistive sensor with minimal drift, low stiffness, and enhanced operating range. The film can replace wires to charge a mobile phone at ∼350% strain and monitors bodily motion in real‐time via a portable ...
Patryk Wojciak +3 more
wiley +1 more source
3D Printing of Soft Robotic Systems: Advances in Fabrication Strategies and Future Trends
Collectively, this review systematically examines 3D‐printed soft robotics, encompassing material selections, function integration, and manufacturing methodologies. Meanwhile, fabrication strategies are analyzed in order of increasing complexity, highlighting persistent challenges with proposed solutions.
Changjiang Liu +5 more
wiley +1 more source
3D Reservoir Simulation of a Hydraulically Fractured Vertical Gas Well Using the Embedded Discrete Fracture Model (EDFM) [PDF]
According to the 2017 outlook on energy conducted by the EIA, the production of natural gas from shale reservoirs is expected to increase by 2040. This increase is dependent on multiple factors like technology, resources, and market conditions.
Orta, Samuel Rene
core
Perivascular matrix densification promotes the emergence of aberrant endothelial tip cells (ATECs) that invade and persist within fibrotic microenvironments. Using in vivo lineage tracing and a human microvessel model, this study shows that fibrous matrix cues destabilize VE‐cadherin–mediated junctions to gate TGF‐β signaling, inducing a pro ...
Jingyi Xia +17 more
wiley +1 more source
This study combines full‐field tomography with diffraction mapping to quantify radial (ε002$\varepsilon _{002}$) and axial (ε100$\varepsilon _{100}$) lattice strain in wrinkled carbon‐fiber specimens for the first time. Radial microstrain gradients (−14.5 µεMPa$\varepsilon \mathrm{MPa}$−1) are found to signal damage‐prone zones ahead of failure, which ...
Hoang Minh Luong +7 more
wiley +1 more source
Ferroelectric Devices for In‐Memory and In‐Sensor Computing
Inspired by biological systems, in‐memory and in‐sensor computing overcome von Neumann bottlenecks. Ferroelectric devices can mimic synaptic functions and sense stimuli like light or force, therefore are ideal for these paradigms. This review introduces the ferroelectric devices applied for in‐memory and in‐sensor computing, covering their structures ...
Hong Fang +5 more
wiley +1 more source
A Hybrid Embedded Fracture (HEF) model was developed to reduce various computational costs while maintaining physical accuracy (Amir and Sun, 2016). HEF splits the computations into fine scale and coarse scale.
Chen, Huangxin, Amir, Sahar, Sun, Shuyu
core +1 more source

