Results 121 to 130 of about 43,857 (286)
Alloy Qualification for Producing Quench and Tempered Plate Steels with Extra‐Heavy Gage
steel research international, EarlyView.This study develops alloy concepts for ultraheavy steel plates (>100 mm) with ≥690 MPa yield strength. Through dilatometry and Jominy testing, the effects of Mo, Ni, and B on hardenability are quantified. A synergy between 0.5% Mo and 0.5%–1.0% Ni ensures core strength at low cooling rates, while boron microalloying suppresses ferrite and promotes ...
Xabier Azpeitia +5 more
wiley +1 more source
steel research international, EarlyView.Elemental redistribution during coprecipitation of kappa (κ)‐type and B2 precipitates in an Al‐alloyed lightweight steel is revealed by atom probe tomography (APT) and density functional theory (DFT). Fe and Ni redistribution promotes the evolution of B2 phase from NiAl‐type toward FeAl‐type and improves the stability of κ and B2 phases during ...
Bowen Zou +6 more
wiley +1 more source
MetalsExisting studies suggest that hydrogen embrittlement will occur in pipeline steel under a hydrogen environment, and gas is often used as a hydrogen embrittlement inhibitor. As one of the most effective hydrogen carriers, methanol may competitively adsorb
Li Xiao +4 more
doaj +1 more source
Barriers to Steel Decarbonization
steel research international, EarlyView.Main identified barriers to steel decarbonization Carbon dioxide (CO2) emissions are a leading contributor to global climate change, necessitating urgent mitigation strategies. While various metrics—such as total national emissions, per‐capita output, and historical contributions—define responsibility, determining accountability remains complex ...
Pasquale Cavaliere
wiley +1 more source
The Effect of Microstructure on the Water Embrittlement of Dual-Phase Austempered Ductile Irons
MetalsThis study investigates the effect of microstructure on water-induced embrittlement of dual-phase austempered ductile iron (ADI). Dual-phase ADI materials were produced by austenitization at 780, 800, 820, and 840 °C followed by austempering at 400 °C/1 ...
Petar Janjatović +6 more
doaj +1 more source
Elevated temperature stress corrosion of high strength sheet materials in the presence of stress concentrators Final report [PDF]
Mechanism of hot salt stress corrosion cracking of titanium base ...
Lingwall, R. G., Ripling, E. J.
core +1 more source
steel research international, EarlyView.Paint baking of resistance spot welded joints of 2.0 GPa warm‐stamped medium‐Mn steel activates low‐temperature tempering, forming fine cementite in the fusion zone and enhancing toughness. Crack propagation resistance increases, shifting the failure mode from partial interfacial to complete pullout, with peak load and energy absorption rising ...
Sunusi Marwana Manladan +8 more
wiley +1 more source
steel research international, EarlyView.An accurate moving boundary model for volume diffusion containing boundary conditions from trans‐interface diffusion (TID) simulates the austenite growth during cooling. TID of Cr, Mo, N and Ni enhance growth kinetics. Without TID, compositions of the interface region change, decreasing the driving force for growth and finally causing numerical ...
A. Salwén +3 more
wiley +1 more source
Effects of temperature and strain rate on the mechanical properties of T91 material tested in liquid lead bismuth eutectic [PDF]
, 2006 ALMAZOUZI, A +2 more
core +1 more source