Results 11 to 20 of about 19,112 (200)
Factors Influencing Reinforcement of NR and EPDM Rubbers with Short Aramid Fibers [PDF]
, 2010 Among short fiber reinforced composites, those with rubbery matrices have gained great importance due to the advantages they have in processing and low cost, coupled with high strength.
Noordermeer, J.W.M., Shirazi, M.
core +41 more sources
Recycling of EPDM waste. I. Effect of ground EPDM vulcanizate on properties of EPDM rubber
Journal of Applied Polymer Science, 2001 AbstractProcessing, cure characteristics, and mechanical properties of EPDM rubber containing ground EPDM vulcanizate of known composition were studied. Mooney viscosity increases and Mooney scorch time decreases by the addition of the ground vulcanizate. At higher loadings of the ground rubber, the maximum rheometric torque decreases.
Ceni Jacob +3 more
+7 more sources
eXPRESS Polymer Letters, 2022 Novel materials with neutron shielding property were fabricated by incorporating boron compounds into highdensity polyethylene (HDPE)/Ethylene propylene diene monomer rubber (EPDM) blends.
Sajith Thottathil Abdulrahman +10 more
doaj +1 more source
Polymer Testing, 2023 Ethylene Propylene Diene rubber (EPDM), is present in many applications. However, its crosslinked structure makes difficult its recycling. The use of devulcanized EPDM, (dEPDM) as a component of elastomeric composites, is a real possibility to reuse EPDM
X. Colom +5 more
doaj +1 more source
Photothermal Polymer Nanocomposites of Tungsten Bronze Nanorods with Enhanced Tensile Elongation at Low Filler Contents [PDF]
, 2019 We present polymer nanocomposites of tungsten bronze nanorods (TBNRs) and ethylene propylene diene monomers (EPDM). The combination of these components allows the simultaneous enhancement in the mechanical and photothermal properties of the composites at
Byoungyun Jeon +6 more
core +1 more source
Impact behaviour of nylon-rubber blends: 5. Influence of the mechanical properties of the elastomer [PDF]
, 1989 Blends of 90wt% nylon-6 and 10wt% impact modifier were prepared. As impact modifiers were used: EPDM (ethylene propylene diene monomer) rubber, EPM (ethylene propylene monomer) rubber, polyethylene, four poly(ether esters) and some commercial impact ...
Borggreve, R.J.M. +2 more
core +3 more sources
Hecheng xiangjiao gongye, 2022 Ethylene-propylene diene rubber (EPDM)/cis-1,4-polybutadiene rubber (BR)/ethylene- butene diene rubber (EBDM) composites for high-speed railway vibration damping pads were prepared, and the effects of EPDM raw rubber types and their proportions ...
XIAO Cheng-yuan, TAN Lian-ying, YU Hai-wen, CHEN Xiao-yan, LIU Quan
doaj +1 more source
Vertical facing panel-joint gap analysis for steel-seinforced soil walls [PDF]
, 2016 This paper reports the results of a numerical parametric study focused on the prediction of vertical load distribution and vertical gap compression between precast concrete facing panel units in steel-reinforced soil walls ranging in height from 6 to 24 ...
Bathurst, Richard +3 more
core +2 more sources
Melt free-radical grafting of glycidyl methacrylate (GMA) onto EPDM backbone and effect of EPDM-g-GMA on the morphology and mechanical properties of PS/EPDM/PA6 ternary blends [PDF]
Polyolefins Journal, 2021 Melt free-radical grafting reactions between ethylene-propylene-dieneterpolymer (EPDM) and glycidyl methacrylate (GMA) were investigated in a batch mixer (170°C, 60rpm).
Marzie Alidadi-Shamsabadi +1 more
doaj +1 more source
Low-Mass Eclipsing Binaries in the Initial Kepler Data Release [PDF]
, 2010 We identify 231 objects in the newly released Cycle 0 dataset from the Kepler Mission as double-eclipse, detached eclipsing binary systems with Teff < 5500 K and orbital periods shorter than ~32 days. We model each light curve using the JKTEBOP code with
Baraffe +39 more
core +2 more sources