Results 41 to 50 of about 9,557 (254)
Maleic anhydride grafting on EPDM rubber in the melt [PDF]
Polymer, 1992 The grafting of maleic anhydride on a EPDM rubber was studied with a twin screw extruder. The effect of barrel temperatures, throughput, maleic anhydride concentration and peroxide concentration [bis(t-butyl peroxy isopropyl)benzene] on the degree of grafting and melt viscosity was studied.
Oostenbrink, A.J. +2 more
openaire +2 more sources
Archives of Acoustics, 2018 Considering the environmental pollution caused by waste rubber, some measures should be taken to improve the utilization rate of waste rubber. In this study, the effect of Ethylene Propylene Diene Monomer (EPDM) particles in the polyurethane (PU) foams ...
Wenbo ZHU +4 more
doaj +1 more source
Use of ground EPDM wastes in EPDM-based rubber compounds
Journal of Elastomers & Plastics, 2013 Ethylene-propylene-diene monomer rubber (EPDM)-based ground wastes (W-EPDM) are reutilized as rubber matrix in plug material compounds for automotive applications. Production scraps of target product are ground to 35, 40 and 60 mesh in ambient conditions. Effect of particle size and the amount of W-EPDM is studied.
Karaagac, Bagdagul +2 more
openaire +4 more sources
Selection of elastomeric membranes for the removal of volatile organics from water [PDF]
, 1993 A wide range of homogeneous elastomeric membranes has been prepared using dicumylperoxide as a general cross-linking agent. The membranes have been used for both equilibrium sorption measurements and steady-state pervaporation experiments to study ...
Mulder, M.H.V. +4 more
core +2 more sources
Research on Multivariate Nano-composites for High-speed Train Windshield
机车电传动, 2021 The nano-composites were prepared with ethylene-propylene diene rubber (EPDM) and organic montmorillonite(OMMT) nano-composite as basic material, and polyhedral oligomeric silsesquioxane(POSS), aluminium hydroxide(Al(OH)3), expanded graphite(EG) as ...
Lianying TAN +5 more
doaj
Risk assessment of failure of outdoor high voltage polluted insulators under combined stresses near shoreline [PDF]
, 2017 The aim of this paper is to investigate the various effects of climate conditions on outdoor insulators in coastal areas as a result of saline contamination under acidic and normal cold fog, determining significant electrical and physico-chemical changes
Gene +7 more
core +3 more sources
Dependence of Adhesion Property of Epoxidized Natural Rubber (ENR 25)/Ethylene-Propylene-Diene Rubber Blend Adhesives Crosslinked by Benzoyl Peroxide [PDF]
, 2014 The loop tack, peel strength, and shear strength of crosslinked epoxidized natural rubber (ENR 25)/ethylene-propylene-diene rubber (EPDM) blend adhesives were investigated.
Poh, B. T., Teh, Y. Y.
core +3 more sources
Influence of NR/EPDM Ratios on the Performance of Pneumatic Fenders in Seawater [PDF]
E3S Web of ConferencesThe performance of pneumatic fenders in seawater is crucial to ensure safety and serviceability. Hence, the objective of this study is to investigate the performance of compound formulations of two different types of carbon black N660 and N220 at various
Wisojodharmo Lies Agustine +14 more
doaj +1 more source
Fully Transparent Haptic Interface for High‐Resolution Tactile Feedback on Touchscreens
Advanced Science, EarlyView.Integrating haptic feedback into touchscreens—enabling users to feel what they see on screen—has been a longstanding goal. In this article, B. Shan et al develop a transparent morphable haptic interface that transforms touchscreens into finely detailed, programmable morphable surfaces, enabling more effective and immersive human‐computer interaction ...
Boxue Shan +13 more
wiley +1 more source
Hecheng xiangjiao gongye, 2023 Isayev model and Piloyan model were used to fit the vulcanization kinetics parameters and reaction activation energy of ethylene-propylene-diene monomer (EPDM) /ethylene-propylene rubber (EPR) blends with different mass ratios of EPDM to EPR.
ZHANG Wei-jian1, LIU Xu2, GAO Zhen-liang1, LIU Li1, ZHANG Bao-gang1
doaj +1 more source