Results 21 to 30 of about 7,413 (263)
Study the Effect of Erosion-Corrosion of Al-Mg-Si Alloy in Marine Environment [PDF]
Engineering and Technology Journal, 2013 Erosion–corrosion of Al-Mg-Si aluminum alloy in NaCl–water solutions were studied by weight-loss measurements through an impingement jet system. The effect of sand concentration and fluid impingement angle, were investigated.
Nawale E. Abdal-Latefe +2 more
doaj +1 more source
Erosion-corrosion and wear [PDF]
Le Journal de Physique IV, 1993 The basic processes of wear, erosion and erosion-corrosion are reviewed. It is shown that oxide debris can accelerate wear when it is present as particulates, or protect and reduce friction when it is present as a glaze. Erosion-corrosion processes can be understood and organized in a series of regimes that represent a sequence of change in the ...
Birks, N., Pettit, F., Rishel, D.
openaire +1 more source
Tribology Online, 2023 Herein, cavitation erosion tests were carried out on 2205 and 2507 duplex stainless steels (DSSs) in distilled water and artificial seawater using ultrasonic cavitation erosion equipment.
Yapeng Wu, Ying Lian, Yang Li, Mao Feng
doaj +1 more source
Materials Research Express, 2020 Fe-Cr alloys with different chromium contents have been designed in the current study for the ball mill liner working in weakly alkaline slurry. The structure, mechanical properties, corrosion behavior and erosion-corrosion behavior of the alloys were ...
Zhibin Zheng +5 more
doaj +1 more source
Effect of the Heat Treatments on Corrosion and Erosion-Corrosion for Carbon Steel [PDF]
Engineering and Technology Journal, 2011 The aim of present work is to study the effect of different heat treatments [full annealing ,normalizing ,and hardening and tempering at (300C° ,600C°)] on general corrosion and erosion-corrosion for a carbon steel type (C35) in 3.5wt% NaCl solution as ...
Muna k.Abbass +2 more
doaj +1 more source
Lubricants, 2022 The initiation of erosion and the coupled damage of erosion and corrosion on the surface of X65 pipeline steel with varying applied anodic currents were online monitored using the electrical resistance (ER) method.
Kongzhong Liu +5 more
doaj +1 more source
Investigation of Erosion-corrosion of Carbon Steel Elbow in 3.5% Sodium Chloride Containing Quartz
International Journal of Electrochemical Science, 2022 In this study, the erosion-corrosion (E-C) behavior at different locations of a 90° horizontal elbow was investigated under the condition of liquid-solid two-phase flow by weight loss measurement, electrochemical measurement and surface analysis through ...
Zongwu Hu, Rui Xing, Jianguo Liu
doaj +1 more source
Use of Electrochemical Tests for Assessment of the Effect of Erosive Particle Size on the Erosion-Corrosion Behaviour of AISI 304L Austenitic Stainless Steel [PDF]
Materials Research, 2016 The degradation of AISI 304L stainless steel under static corrosion, liquid impingement and corrosion-erosion was studied using polarization curves. Static corrosion and liquid impingement tests were performed in 3.5% NaCl solution.
Diana Maria López +2 more
doaj +1 more source
Journal of Materials Research and TechnologyAging hardening nickel-based alloy 718 is a key material for oil and gas applications, but it is susceptible to fatigue failure under the combined effects of cyclic loading and corrosive media. This study focused on exploring low-temperature Arc-Enhanced
Rongrong Chen +8 more
doaj +1 more source
Flow accelerated corrosion and erosion−corrosion behavior of marine carbon steel in natural seawater
npj Materials Degradation, 2021 In this work, flow accelerated corrosion (FAC) and erosion−corrosion of marine carbon steel in natural seawater were electrochemically studied using a submerged impingement jet system. Results show that the formation of a relatively compact rust layer in
Yunze Xu +6 more
doaj +1 more source