Results 11 to 20 of about 30,667,702 (184)

Numerical Study to Evaluate the Flexural Performance of Concrete Beams Tensile Reinforced with Fe-Based Shape Memory Alloy Rebar According to Heating Temperature [PDF]

open access: yesMaterials (Basel)
An Fe-based shape memory alloy (Fe-SMA) is an alloy that has a characteristic of being able to return to its original shape when heated, even after undergoing plastic deformation.
Ki-nam Hong, S. Ji, Yeongmo Yeon
semanticscholar   +3 more sources

Finite Element Analysis of Reinforced Concrete Beams Prestressed by Fe-Based Shape Memory Alloy Bars

open access: yesApplied Sciences, 2022
Prestressing of concrete structures using Fe-based shape memory alloys has been investigated extensively by experiments in the last decade. However, detailed investigations on the stress produced by the Fe-based shape memory alloys and its influence on ...
Yeong-Mo Yeon, Wookjin Lee, Ki-Nam Hong
doaj   +2 more sources

Microstructure and Shape Memory Properties of Gas Tungsten Arc Welded Fe-17Mn-5Si-10Cr-4Ni-(V, C) Shape Memory Alloy [PDF]

open access: yesMaterials (Basel)
In this study, microstructure, mechanical, and shape memory properties of the welded Fe-based shape memory alloy (Fe-SMA) plates with a nominal composition of Fe-17Mn-5Si-10Cr-4Ni-(V, C) (wt.%) by gas tungsten arc welding were investigated.
Dohyung Kim   +5 more
semanticscholar   +3 more sources

Comparison of Stress-induced Martensitic Transformation Under Tension and Compression in Fe-28Mn-6Si-Cr Shape Memory Alloy

open access: yesEPJ Web of Conferences, 2018
In the case of the NiTi alloy, some research works reported that the stress-strain curve differs significantly between tension and compression. It is considered that the difference in stress-induced martensitic transformation behavior may be observed ...
Cao Bo, Iwamoto Takeshi
doaj   +2 more sources

Development of Nail-Anchor Strengthening System With Iron-Based Shape Memory Alloy (Fe-SMA) Strips

open access: yesConstruction and Building Materials, 2019
This work discusses the development process of a direct fastening technique for strengthening steel members using iron-based shape memory alloy (Fe-SMA) strips.
Elyas Ghafoori, Mohammadreza Izadi
exaly   +2 more sources

Shear Performance of RC Beams Reinforced with Fe-Based Shape Memory Alloy Stirrups

open access: yesMaterials, 2022
In this study, the shear performance of a reinforced concrete (RC) beam with Fe-based shape memory alloy (Fe-SMA) stirrups was evaluated experimentally and analytically. Five specimens that had a possibility of shear failure under four-point loading were
S. Ji, Yeongmo Yeon, Kinam Hong
semanticscholar   +2 more sources

Thermomechanical Characterization and Performance Evaluation of an Fe-Based Shape Memory Alloy for Coupling Applications [PDF]

open access: yesShape Memory and Superelasticity
This study investigates the thermomechanical behavior and performance of a Fe-based shape memory alloy (Fe-SMA) for coupling applications. The alloy, composed of Fe–17Mn–5Si–10Cr–4Ni–1(V,C) (wt.%), was manufactured via induction melting followed by hot ...
M. Mohri   +3 more
semanticscholar   +2 more sources

Potential and limits of Fe-SMA for asphalt crack self-repair: a critical review on thermal FIT & active reinforcement [PDF]

open access: yesRSC Advances
Over the years, studies have shown that fatigue cracking, caused by repeated traffic loads and daily or seasonal thermal cycles, constitutes the most dominant form of degradation in bituminous pavements.
Michel Muanda Ntoto
doaj   +2 more sources

Corrosion Behavior of Heat‐Treated Fe‐Based Shape Memory Alloys

open access: yesMaterials and Corrosion
The influence of various heat treatments on the corrosion behavior of a novel iron‐based shape memory alloy (Fe‐SMA), Fe‐17Mn‐6Si‐10Cr‐4Ni‐1(V,C), used as prestressing elements in civil engineering was examined through electrochemical corrosion methods ...
P. Kulkarni   +6 more
semanticscholar   +2 more sources

Recent Advancements in Development and Application of an Iron-based Shape Memory Alloy at Empa

open access: yesCHIMIA, 2022
The Fe-SMA developed at the Swiss Federal Laboratories for Materials Science and Technology (Empa) has an alloy composition of Fe–17Mn–5Si–10Cr–4Ni–1(V,C) and exhibits an excellent shape memory effect on heating at 160 °C or above.
Moslem Shahverdi   +5 more
doaj   +1 more source

Home - About - Disclaimer - Privacy