Results 191 to 200 of about 18,023 (230)

Composite of austenitic-ferritic stainless steel

Journal of Materials Processing Technology, 1995
Abstract A new precipitation hardening duplex type stainless steel, Mo- and Ni-free, containing 20 Cr, 16 Mn, 2 Si and 0.3 Ti has been developed. The steel possesses a combination of an unusually high strength (Y.S. 600–700 MPa), good ductility and high pitting corrosion resistance after various treatments.
openaire   +1 more source

Heat Treating of Ferritic Stainless Steels

2014
Abstract Ferritic stainless steels are essentially chromium containing steel alloys with at least 10.5% Cr. They can be grouped based on their chromium content: low chromium (10.5 to 12.0%), medium chromium (16 to 19%), and high chromium (greater than 25%). This article provides general information on the metallurgy of ferritic stainless
openaire   +1 more source

Recrystallization of ferrite–austenite stainless steel

Metal Science, 1984
AbstractProcesses taking place in the course of annealing of deformed ferrite–austenite stainless steel have been examined by means of light and electron metallography. Deformations of 23, 43, and 85% were obtained by rolling at room temperature. It has been found that ferrite and austenite recrystallize discontinuously irrespective of the magnitude of
openaire   +1 more source

Stress Corrosion of Ferritic Stainless Steels

CORROSION 1975, 1975
Ferritic, iron-chromium stainless steels with chromium in the range of 14% to 27% are generally considered resistant to chloride stress-corrosion cracking and are sometimes used for this reason in place of the austenitic 18Cr-8Ni, steels, which readily fail by this form of corrosion.
openaire   +1 more source

Improved Ferritic–Austenitic Stainless Steel

British Corrosion Journal, 1979
W. H. Richardson, P. Guha
openaire   +1 more source

Stainless Steels, Ferritic

2016
M. Cortie, M. du Toit
openaire   +1 more source

Embrittlement of ferrite-austenite and ferrite stainless steels

Metal Science and Heat Treatment, 1965
A. P. Gulyaev, Z. G. Fel'dgandler, L. Ya. Savkina   +2 more
openaire   +1 more source

Corrosion of Ferritic Stainless Steel Weldments

2006
Abstract Ferritic stainless steels are essentially iron-chromium alloys with body-centered cubic crystal structures. Chromium content is usually in the range of 11 to 30%. The primary advantage of the ferritic stainless steels, and in particular the high-chromium, high-molybdenum grades, is their excellent stress-corrosion cracking ...
openaire   +1 more source

Ferritic Stainless Steel Welding Metallurgy

Key Engineering Materials, 1992
openaire   +1 more source

A review on effects of nitriding of AISI409 ferritic stainless steel

Materials Today: Proceedings, 2020
Ram Subbiah, Swadesh Kumar Singh
exaly