Results 121 to 130 of about 8,354,979 (301)
Acoustic emission rate behavior of laminated wood specimens under tensile loading
, 2006 Quasi-static tensile tests on two different types of laminated wood specimens are monitored with acoustic emission (AE). AE signal parameter data are analyzed with respect to AE rate behavior under quasi-static tensile loading to failure.
Howald, Martin T. (author) +2 more
core +1 more source
Field enhanced thermionic emission from oxide coated carbon nanotubes
, 2006 A cathode structure was demonstrated that utilizes aligned carbon nanotubes (CNTs) to improve the thermionic electron emission by increasing the field enhancement of the cathode surface.
Day, Christopher M.
core
Structural characterization and field emission of stacked-cone GaN nanorods
, 2010 The stacked-cone morphology GaN nanorods with diameters of 100–400 nm and lengths of tens of micrometers were synthesized by metal-catalyzed chemical vapor deposition. The stacked-cone GaN nanorods possessed dominated hexagonal crystalline structure with
Li, Chun +9 more
core +1 more source
Advanced Engineering Materials, EarlyView.Solvate ionic liquids lubrication reduced the coefficient of friction by ∼60% compared to dry sliding, reaching steady‐state values as low as 0.04–0.05. Corrosion weight‐loss measurements in 1 M HCl further demonstrated significant inhibition behavior, with only 100 ppm of [Li(G3)][TFSI] (∼68.5 μL/L) reducing corrosion‐product weight loss by 63 ...
Sameh Dabees +6 more
wiley +1 more source
Stanley Field Correspondence, 1912–1915
This correspondence collection is primarily comprised of letters by Stanley Field and Carl Akeley. The contents of the correspondence largely address the African buffalo diorama group and its installation at the Field ...
President. Field Museum of Natural History
core
Advanced Engineering Materials, EarlyView.Binder‐free laser powder bed fusion of 8YSZ with a femtosecond laser is used to map process windows linking scan strategy, heat accumulation, and grain growth. Time‐resolved thermography and simulations reveal thermal regimes that enable continuous, vitrified, and fine‐grained 8YSZ surface layers without absorptive additives and demonstrate ...
Markus Kühn +5 more
wiley +1 more source
Rapidly Solidified High‐Strength Invar 36 Prepared by Planar‐Flow Melt Spinning
Advanced Engineering Materials, EarlyView.The Invar 36 alloy was rapidly solidified using the planar‐flow melt‐spinning technique. Ribbon samples with thicknesses ranging from 20 to 160 mm were produced. As the grain size of the ribbon decreased to sub‐micron levels, the hardness increased by more than 2 times.
Bekir Akgül, Mehmet Kul
wiley +1 more source
FastNano Liquid: An Automated Platform for Small‐Angle X‐ray Scattering‐Based Materials Discovery
Advanced Engineering Materials, EarlyView.We present FastNano Liquid, an automated small‐ and wide‐angle X‐ray scattering platform for the combined synthesis and characterization of (nano)materials. The platform is coupled to varied reactor workflows for both in situ studies of reaction kinetics and ex situ screening of synthesis conditions to support machine learning‐guided exploration ...
Pierre‐Baptiste Flandrin +16 more
wiley +1 more source
Advanced Engineering Materials, EarlyView.To enhance through‐thickness conductivity without sacrificing impregnation, large spherical graphite particles are intentionally employed in a low‐viscosity resin. Unlike finer conductive fillers, these particles remain outside the fiber bundles and accumulate in resin‐rich interlaminar regions during molding.
Keito Hosoe +6 more
wiley +1 more source
Review of Positron Emission Tomography at Royal Prince Alfred Hospital, CHERE Project Report No 18 [PDF]
This report is a review of the clinical uses, impacts on clinical management, clinical outcome and resource use of Positron Emission Tomography (PET) at Royal Prince Alfred Hospital (RPAH).Positron emission ...
Christine Pollicino +4 more
core