Results 91 to 100 of about 1,188,846 (304)

Measurement of liquid film thickness during coalescence of colliding twin bubbles applying laser extinction method

Nihon Kikai Gakkai ronbunshu, 2014
Despite intensive investigations on bubble dynamics, many unknown items are remained concerning bubble coalescence. The objective of the study is to investigate experimentally the characteristics of formation, temporal change in thickness distribution ...
Takayuki MOROKUMA, Yoshio UTAKA
doaj   +1 more source

Inflammatory Response‐Inspired Thermochromic Shield for Pneumatic Structures

Advanced Engineering Materials, EarlyView.
A thermochromic shield for pneumatic structures is developed, using anhydrous sodium acetate powder and thermochromic pigment‐included solution. In this shield composed of three layers, the exothermic and thermochromic reactions, followed by the mixture of both components, occur promptly with an incident of penetrating damage as a sign of initial ...
Hyun Jae Lee, Ryuma Niiyama
wiley   +1 more source

Does Vertebroplasty Affect Radiation Dose Distribution?: Comparison of Spatial Dose Distributions in a Cement-Injected Vertebra as Calculated by Treatment Planning System and Actual Spatial Dose Distribution

Radiology Research and Practice, 2012
Purpose. To assess differences in dose distribution of a vertebral body injected with bone cement as calculated by radiation treatment planning system (RTPS) and actual dose distribution. Methods.
Atsushi Komemushi, Noboru Tanigawa, Shuji Kariya, Rie Yagi, Miyuki Nakatani, Satoshi Suzuki, Akira Sano, Koshi Ikeda, Keita Utsunomiya, Yoko Harima, Satoshi Sawada   +10 more
doaj   +1 more source

A necklace of Wulff shapes

, 2005
In a probabilistic model of a film over a disordered substrate, Monte-Carlo simulations show that the film hangs from peaks of the substrate. The film profile is well approximated by a necklace of Wulff shapes.
C. Fortuin, D. B. Abraham, D. B. Abraham, François Dunlop, H. van Beijeren, J. De Coninck, Joël De Coninck, O. Hryniv, T. E. Harris, Thierry Huillet   +9 more
core   +2 more sources

Investigation of Laser Ablation and Brush Pre‐Treatments for AlCu Cold Roll Bonding in Oxygen‐Free Conditions

Advanced Engineering Materials, EarlyView.
It is shown that laser ablation pretreatment under oxygen‐free conditions enables copper–aluminium bonding at significantly lower deformation degrees and improved properties compared to mechanical brushing. Laser ablation further increases interface contact area and induces favourable residual stress states and microstructural compatibility ...
Khemais Barienti, Finn‐Lennard Janthur, Selina Raumel, Sascha Jan Zimmermann, Sarah Seffer, René Gustus, Sebastian Herbst, Marc C. Wurz, Ludger Overmeyer, Wolfgang Maus‐Friedrichs, Hans Jürgen Maier, Florian Nürnberger   +11 more
wiley   +1 more source

Experimental Investigation on Wall Film Distribution of Dimethyl Ether/Diesel Blended Fuels Formed during Spray Wall Impingement

Energies, 2016
Dimethyl ether (DME)/diesel blended fuels are used to improve the emissions caused by spray wall impingement during the early injection period. However, experimental results have showed that the spray wall impingement still cannot be avoided due to the ...
Hanzhengnan Yu, Xingyu Liang, Gequn Shu, Xu Wang, Yuesen Wang, Hongsheng Zhang   +5 more
doaj   +1 more source

Current density inhomogeneity throughout the thickness of superconducting films and its effect on their irreversible magnetic properties

, 1997
We calculate the distribution of the current density $j$ in superconducting films along the direction of an external field applied perpendicular to the film plane. Our analysis reveals that in the presence of bulk pinning $j$ is inhomogeneous on a length
A. Gurevich, A. Mongo-Campero, A. Neminsky, A. Shaulov, B. Plaçais, C. Jooss, C. Jooss, D. Bhattacharia, E. B. Sonin, E. B. Sonin, E. B. Sonin, E. B. Sonin, E. B. Sonin, E. H. Brandt, E. H. Brandt, E. H. Brandt, E. H. Brandt, E. H. Brandt, E. H. Brandt, E. H. Brandt, E. Sheriff, E. Sheriff, E. Zeldov, E. Zeldov, G. Koren, J. McDonald, L. Civale, M. Golosovskii, M. McElfresh, M. R. Koblischka, M. R. Koblischka, M. R. Koblischka, P. H. Kes, P. Mathieu, R. Prozorov, R. Prozorov, R. Prozorov, T. Schuster, V. K. Vlasko-Vlasov, V. K. Vlasko-Vlasov, W. T. Norris, Y. Yeshurun   +41 more
core   +2 more sources

Reduction of Oxide Inclusions During the High‐Frequency Welding of Steel via a Nonthermal Ar/H2 Plasma Jet

Advanced Engineering Materials, EarlyView.
High‐frequency (HF) welding of steel is limited by oxide inclusions that degrade weld quality. This study demonstrates, for the first time, the integration of a nonthermal Ar/H2 dielectric barrier discharge (DBD) plasma jet into HF welding. Local plasma treatment provides effective shielding and in‐situ oxide reduction, resulting in markedly fewer and ...
Viktor Udachin, Lienhard Wegewitz, René Gustus, Henning Wiche, Wolfgang Maus‐Friedrichs   +4 more
wiley   +1 more source

IS THE CINEMA FOR THE VIEWER? THE STORY OF ONE MEETING

Известия высших учебных заведений. Поволжский регион: Гуманитарные науки, 2020
Background. The article discusses the activities of the city film distribution system in Leningrad during the thaw years. The purpose of this work is to compare the Leningrad and Moscow film screening systems, identify specific features inherent in ...
V. N. Grechkin
doaj   +1 more source

Distributional Thinking about Film Style

Exchanges: The Interdisciplinary Research Journal, 2022
This article illustrates the use of quantiles as a means of describing and comparing motion picture shot length distributions. This approach is conceptually and computationally simple and leads us to think distributionally about shot lengths rather than focusing on individual values.
openaire   +1 more source