Results 111 to 120 of about 1,016,471 (240)

An Experimental Investigation on the Impact of Burner Height and Location on the Characteristics of Externally Venting Flames

Fire and Materials, EarlyView.
ABSTRACT Fire sources in actual compartment fires exhibit a predominantly uneven spatial distribution. In this context, the impact of the height and location of the fire source, as well as the heat release rate (HRR) of the fire, on the thermal characteristics of Externally Venting Flames (EVF) is experimentally investigated.
Dionysios I. Kolaitis, Andrianos E. Koklas   +1 more
wiley   +1 more source

Influence of Adhesive Type on Heat Induced Delamination in Tension Loaded Shear Lap Cross‐Laminated Timber Samples Exposed to Radiant Heat Flux

Fire and Materials, EarlyView.
ABSTRACT Heat induced delamination (HID) is a phenomenon in engineered wood products which may result in the detachment of the bonded timber lamellae before charring propagates to the bond line interphase. This study aims to correlate the thermal degradation of two 1‐c‐polyurethane adhesives at the microscale to the thermo‐hydro‐mechanical behaviour of
A. Čolić, F. Wiesner, M. Spearpoint, D. Hopkin, L. Bisby   +4 more
wiley   +1 more source

Flame Behaviour in an Acoustically Forced Gas Turbine Combustor [PDF]

, 2009
A swirl stabilised dump combustor capable of imposing flow perturbations creating combustion instabilities has been designed and commissioned. The capability of supplying different fuel mixtures (methane hydrogen blends) has been incorporated ...
Ruggles, Adam
core   +1 more source

Finalisation of the European Approach to Assess the Fire Performance of Facades—Brief Information on the Outcome of the Project

Fire and Materials, EarlyView.
ABSTRACT This research was conducted within the framework of project SI2.825082, funded by the European Commission—DG GROW. The project's objective was to finalise a European approach for assessing the fire performance of façades under medium and large fire exposure conditions.
Péter Tóth, Anja Hofmann‐Böllinghaus, Fabien Dumont, Johan Anderson, Johan Sjöström, Mikael Bergius, Roman Chiva, Octavian Lalu   +7 more
wiley   +1 more source

Charring Behaviour of Mass Timber: A Comparison of Thin Intumescent Coatings and Plasterboard

Fire and Materials, EarlyView.
ABSTRACT This study compares the charring behaviour of mass timber under varied heating conditions when protected by either different thin intumescent coating types or fire‐rated plasterboard layers. Bench‐scale fire experiments were conducted using the Heat‐Transfer Rate Inducing System (H‐TRIS).
Stavros Spyridakis, Anwar Orabi, Cristian Maluk, David Barber, Felix Wiesner   +4 more
wiley   +1 more source

Flammability of Facades Across Scales and International Standards

Fire and Materials, EarlyView.
ABSTRACT Facade fires are a rare but destructive hazard that can lead to the rapid spread of fire between the floors and fire compartments of a building. Today, there are at least 21 different national standards for facade fire tests in use around the world, which seek to categorize facades based on their flammability.
Matthew Bonner, Wojciech Węgrzyński, Jakub Bielawski, Guillermo Rein   +3 more
wiley   +1 more source

Combustion Properties of Timber in Historic Structures: Case Study of the São Pedro de Alcântara Chapel Fire

Fire and Materials, EarlyView.
ABSTRACT Timber plays a fundamental role in the fire performance of historic building components, where ageing and environmental exposure can markedly influence its physical and chemical properties. This study presents an experimental investigation of the fire behaviour of Ocotea sp.
João Vitor Lopes Ferreira, Ana Lucia de Souza Ventapane, Bruno Polycarpo Palmerim Dias, Simone Pereira da Silva Ribeiro, Alexandre Landesmann   +4 more
wiley   +1 more source

Study of Damage to Shutters Exposed to a Vegetation Fire: Definition of Vulnerability Thresholds

Fire and Materials, EarlyView.
ABSTRACT This study examines the fire behavior of wooden, PVC, and aluminum shutters through laboratory and large‐scale experiments. Laboratory tests were conducted using a cone calorimeter to assess the ignitability of the PVC and wooden shutters, focusing on the critical heat flux of ignition, ignition time and critical Flux Time Product (FTP ...
C. Luciani, V. Tihay‐Felicelli, F. Morandini, A. Pieri, P. A. Santoni, T. Barboni   +5 more
wiley   +1 more source

Python-based flame characterization of diesel combustion in CO₂/O₂ atmosphere

四川大学学报. 自然科学版
To analyze the combustion characteristics of diesel fuel in a CO2/O2 atmosphere, optical constant volume combustion chamber tests were conducted to measure and capture the combustion processes under six different operating conditions. The resultant flame
CHEN Rui-Zhe, LIU Yong-Feng, WANG Long, ZHANG Lu, HE Xu, SONG Jin-Ou   +5 more
doaj  

Architecting nano‐Al/HMX/CuO energetic micro‐units unlocks superior interface and highly efficient combustion

InfoMat, EarlyView.
Improving the dispersion of nano‐aluminum is of great importance in explosives and propellants. The spherical Al/HMX/CuO energetic micro‐units were prepared using microchannel technology, which significantly improved the uniformity and dispersion of nano‐Al. It also enhanced the mass and heat transfer efficiency between the fuel and oxidizer components,
Gazi Hao, Tianxu Xi, Yong Kou, Cheng Zhang, Ronghuan Yang, Jiahao Yu, Qiangqiang Lu, Hongyu Yang, Chong Chen, Lei Xiao, Jun Di, Fengqi Zhao, Wei Jiang   +12 more
wiley   +1 more source