Results 21 to 30 of about 6,086,816 (288)
Evaluation of burning rate in microgravity based on the fuel regression, flame area, and spread rate
Combustion and Flame, 2022 Abstract The fuel burning rate and heat-release rate (HRR) play key roles in determining the fire intensity and hazard. On Earth, the burning rate of a condensed fuel is normally measured by the mass loss, but in microgravity, the impossibility of measuring the weight loss with a balance makes the measurement of burning rate challenging.
Caiyi Xiong +3 more
openaire +2 more sources
Case Studies in Thermal Engineering, 2021 The laboratory polyethylene wire with different core diameters of 3 mm, 5 mm, 6 mm, 7 mm, 8 mm, 10 mm and 12 mm was used to study the flame spread characteristics. The flame spread could be divided into initial oscillation stage, stable oscillation stage
Xinjie Huang +5 more
doaj +1 more source
Combustion of liquid fuel in rectangular mini and microchannels
MATEC Web of Conferences, 2016 It is shown that flame spread rate can be high and comparable with velocities of flame propagation in the stoichiometric homogeneous gas mixture. The flame spread rate depends on velocity of oxidizer.
Zamashchikov Valery V. +2 more
doaj +1 more source
Flame Spread Behaviour over Combustible Solid of Paper, Bagasse and Paper/Bagasse
MATEC Web of Conferences, 2017 Flame spread over combustible solid must be precisely identify in fire hazard and this is the basic problem in fire safety engineering field. To explore the flame spread mechanism over combustible solid, the downward flame spread behaviour over paper and
Ramli Afifah +6 more
doaj +1 more source
Case Studies in Thermal Engineering, 2019 A series of experiments was designed to investigate the effects of ceiling inclination on lateral flame spread over vertical poly(methyl methacrylate) (PMMA) surface.
Fei Peng +3 more
doaj +1 more source
Microgravity diffusion flame spread over a thick solid in step-changed low-velocity opposed flows
, 2019 We report results from a microgravity combustion experiment conducted aboard the SJ-10 satellite of China, focusing on the structure and dynamics of diffusion flames spreading over a thick PMMA in low-velocity opposed flows.
王双峰, Lu ZB, Yin YL, 朱凤
core +2 more sources
Case Studies in Thermal Engineering, 2019 Linen fabric has been widely applied to interior decoration, medical and health care, industrial fabrics and oil painting exhibitions due to its advantages of good hygroscopicity, strong air permeability, excellent health care functions. In this paper, a
Jinju Zhou +4 more
doaj +1 more source
Spacing effects on downward flame spread over thin PMMA slabs
Case Studies in Thermal Engineering, 2019 To explore the flame spread mechanism over non-charring materials, the downward flame spread over polymethyl methacrylate (PMMA) samples is studied experimentally under the spacing scenarios of 2 mm, 7 mm, 13 mm, 19 mm and 25 mm. The experimental results
Hui Zhu +3 more
doaj +1 more source
Case Studies in Thermal Engineering, 2020 Experimental research on flame spread over discrete extruded polystyrene (XPS) with different fuel coverage rates are conducted in this paper. Flame spread characteristics are measured and discussed. The influence mechanism of the spacing are revealed. A
Zhe Wang +6 more
doaj +1 more source
Combined effects of width and moisture content on upward flame spread over cotton fabrics
Case Studies in Thermal Engineering, 2019 Present work experimentally investigates the combined effects of width and moisture on the upward flame characteristics over cotton fabrics, using 0.245 mm thick and 1500 mm tall samples with 5 different widths (40 mm, 60 mm, 80 mm, 100 mm, 120 mm) and 5
Tianwei Chu +5 more
doaj +1 more source