Results 1 to 10 of about 63 (57)
Analysis of Linseed Production with Use of Flax Puller and Combine Harvester for its Harvest [PDF]
Acta Universitatis Agriculturae Et Silviculturae Mendelianae Brunensis, 2017 The cultivation of linseed is an alternative to the production of flax stem, which is globally on the decline. The alternative method to the traditional harvest using the flax puller is increasing use of combine harvester.
Jiří Soucek, Jan Mareček
exaly +5 more sources
DERIVATION OF THE DIFFERENTIAL EQUATION, DESCRIBING THE FLAX PULLER DIVIDER FUNCTIONING
GISAP Technical Sciences, Construction and Architecture, 2015 The results of theoretical studies on the patterns of changes of loads on the moving dividers and their interaction with the flax stems are presented.
Nalobina, Helena
exaly +4 more sources
Development of Resource-Saving Technology of Linseed Harvesting
Journal of Natural Fibers, 2020 The traditional technology of linseed harvesting involves the cutting of the stems with subsequent threshing. During cutting part of the stem remains on the field, which causes significant losses of fibrous raw materials.
Igor Dudarev, Volodymyr Say
doaj +2 more sources
Flax Harvesting Technologies for Flax Harvesting Machines
Сельскохозяйственные машины и технологии, 2023 The technology of flax harvesting depends on input impacts, including: flax harvester qualitative characteristics; working body parameters; indicators of working conditions; intervening variables reflecting the dynamic properties of the working bodies ...
V. G. Chernikov +2 more
doaj +1 more source
Polymer Composites, EarlyView.AMPRO BIO/flax fiber composites with different fiber orientations fabricated by vacuum bagging for potential use in biomedical and automotive fields. ABSTRACT Replacing traditional thermoset resins with performing bio‐based alternatives plays a crucial role in the development of new sustainable composite materials.
Elisa Toto +4 more
wiley +1 more source
Cleaning of pulley working surfaces in flax pullers
Traktory i sel hozmashiny, 2013 Process of cleaning the working surfaces of pulley pull units in flax pullers from adhered mass was investigated. Results are given, specific advices are stated.
openaire +1 more source
Polymer Composites, EarlyView.Thermal, microstructural, and mechanical characterization of 3D‐printed PLA composite parts. ABSTRACT To address plastic waste and agricultural residue underutilization, this study evaluates the thermal (DSC and FTIR), microstructural (SEM), and mechanical behavior of polylactic acid (PLA) reinforced with flax fibers and olive pit particles, processed ...
P. N. B. Reis +6 more
wiley +1 more source
Polymer Composites, EarlyView.Comparison of canola fiber reinforced composites manufactured using water‐retted, field‐retted, and enzyme‐treated fibers. ABSTRACT Canola fibers obtained from discarded stalks through various processing methods, including water‐retting and field‐retting followed by mechanical decortication and enzymatic degradation, were utilized as discontinuous ...
Md Shadhin +2 more
wiley +1 more source
Polymer Composites, EarlyView.Needle punching reorients fibers from in‐plane direction toward z‐direction of the web, resulting in mechanical interlocking of fibers and reduction in the nonwoven mat thickness. ABSTRACT Replacement of glass fiber mats, utilized in large and complex composite parts in the transportation industry, with natural fiber mats requires knowledge of natural ...
Md Shadhin +2 more
wiley +1 more source
Polymer Composites, EarlyView.Production of flax fabric/polylactic acid biocomposite. ABSTRACT The development of fully biodegradable composites has gained significant attention as a sustainable alternative to traditional fiber‐reinforced materials. This study focuses on enhancing the interfacial adhesion and toughness of flax fiber‐reinforced polylactic acid (PLA) biocomposites ...
Aylin Altınbay
wiley +1 more source