Results 101 to 110 of about 271 (134)
Some of the next articles are maybe not open access.
Optimisation of silver paste for flexography printing on LTCC substrate
Microelectronics Reliability, 2012Abstract The originality of this work consists in printing on ceramic tapes conductive silver tracks that reach a low resistivity by flexography process. Flexography is a solution for the mass production of multimaterial microdevices offering a huge potential of commercialisation in the near future.
Nadege Reverdy-Bruas, Anne Blayo
exaly +3 more sources
Morphology and electrical properties of high-speed flexography-printed graphene
Microchimica Acta, 2022Printed graphene electrodes have been demonstrated as a versatile platform for electrochemical sensing, with numerous examples of rapid sensor prototyping using laboratory-scale printing techniques such as inkjet and aerosol jet printing. To leverage these materials in a scalable production framework, higher-throughput printing methods are required ...
Rebecca R. Tafoya +7 more
openaire +2 more sources
Design of Chipless RFID Tags Printed on Paper by Flexography
IEEE Transactions on Antennas and Propagation, 2013In this paper, we demonstrate for the first time that a 19-bit chipless tag based on a paper substrate can be realized using the flexography technique, which is an industrial high-speed printing process. The chipless tag is able to operate within the ultra-wide band (UWB) and has a reasonable size ( 7×3 cm 2) compared to state-of-the-art versions. Thus,
Etienne Perret +2 more
exaly +3 more sources
Formation of the Printing Elements in the Photopolymer Material Used in Flexography
Key Engineering Materials, 2014Starting point of this paper is photopolymer printing plate used for flexographic printing. It is used for transfer of the printing ink onto the printing surface during the reproduction process. Photopolymer printing plate consists of several layers: polyester basis, photo sensitive polymer material and LAMS - Laser Ablation Mask.
Tomislav Cigula +2 more
exaly +2 more sources
The Impact of Printing Substrate on Dot Deformation in Flexography
Tehnicki Vjesnik, 2018 This study characterizes and compares the dot properties in flexography on coated and uncoated paper and on OPP film, with the use of conventional AM screening technology and photopolymer plate with flat top dots. A monochrome test form was created and printed with cyan ink on three different printing substrates.
Miljković, Petar +2 more
exaly +6 more sources
Catalyst Layers for PEMFC Manufactured by Flexography Printing Process: Performances and Structure
Fuel Cells, 2012AbstractThis article focuses on the potential of a classic printing process, flexography, for manufacturing proton exchange membrane fuel cells (PEMFCs). Gas diffusion electrodes (GDEs) are produced by deposition of a water‐based catalyst ink on a gas diffusion layer (GDL). The affinity between the ink and the GDL is quantified.
Didier Chaussy
exaly +2 more sources
Conductive Improvement of Flexography Printed Silver Pattern by Water Washing
Applied Mechanics and Materials, 2015This work demonstrates a simple method to improve the conductivity of flexography printed silver pattern by water washing. The flexography printed silver pattern was firstly dried in an oven under 120 celsius degree, then was placed into the deionized water.
Yi Fang, Wei Liu, Yan Fang Xu, Lu Hai Li
openaire +1 more source
Qualitative and quantitative evaluation of text printed with flexography on woven labels
Textile Research Journal, 2020Even though textile labels are not often the subject of research, their quality must not be neglected. Printed typographic elements (i.e. letters and texts) must be visible regardless of textile ribbons and typeface or type size to be printed. Thus, the aim of the research was to qualitatively and quantitatively analyze and evaluate the text printed ...
Urška Stanković Elesini +2 more
openaire +1 more source
Additional Conferences (Device Packaging HiTEC HiTEN & CICMT), 2012
The originality of this work is to print with flexography process conductive silver lines suitable for Low Temperature Co-fired Ceramics (LTCC) multilayer systems. Screen printing conductive paste with 65% silver flake particles was optimised for flexography process.
Didier Chaussy +2 more
exaly +2 more sources
The originality of this work is to print with flexography process conductive silver lines suitable for Low Temperature Co-fired Ceramics (LTCC) multilayer systems. Screen printing conductive paste with 65% silver flake particles was optimised for flexography process.
Didier Chaussy +2 more
exaly +2 more sources
The Impact of Top Dot Shapes of the Printing Plate on Dot Formation in Flexography
Tehnicki Vjesnik, 2018 The top dot shape is an important element of plate dot geometry which has a significant effect on dot formation on the prints. There are several key parameters that can affect individual dot deformation: nip engagement, line ruling and dot geometry. The main question is how these parameters affect dot deformation.
Valdec, Dean +2 more
exaly +7 more sources