Results 281 to 290 of about 15,733,928 (351)
Some of the next articles are maybe not open access.
Geotechnical Testing Journal, 2016
Abstract In this study, a testing protocol was developed to measure the flexural strength, flexural modulus, and fatigue failure of cementitiously stabilized materials (CSMs) for both lightly and heavily stabilized soils. Four soils (sand, gravel, silt, and clay) and four binders (cement, lime, class C fly ash, and class F fly ash) were ...
Edil, Tuncer B. +3 more
openaire +2 more sources
Abstract In this study, a testing protocol was developed to measure the flexural strength, flexural modulus, and fatigue failure of cementitiously stabilized materials (CSMs) for both lightly and heavily stabilized soils. Four soils (sand, gravel, silt, and clay) and four binders (cement, lime, class C fly ash, and class F fly ash) were ...
Edil, Tuncer B. +3 more
openaire +2 more sources
Methodology of obtaining intrinsic creep property of concrete by flexural deflection test
Cement & Concrete Composites, 2019The shrinkage of concrete when exposed to external drying influences the accurate quantification of concrete creep. To reduce the effect of shrinkage on the measured creep, particularly for concrete at early ages when the shrinkage is pronounced, a ...
S. Liang, Ya Wei
semanticscholar +1 more source
Flexural Properties and Hardness of CAD-CAM Denture Base Materials.
Journal of Prosthodontics, 2022PURPOSE To compare flexural strength, elastic modulus, and surface hardness of CAD-CAM milled, 3D-printed, and heat-polymerized denture base resins. MATERIALS AND METHODS A total of 120 specimens were fabricated from heat-polymerized acrylic resin (HP),
Shaimaa M. Fouda +8 more
semanticscholar +1 more source
Flexure-based Micromechanical Testing Machines
Experimental Mechanics, 2005The successful design and fabrication of structures and systems at the small scale require robust methods for characterizing the mechanical behavior of materials at the same scale. In this paper we describe the design of two flexure-based micromechanical testers capable of measuring forces with an accuracy of 25 μN over a range of 1–30 N, and specimen ...
S. Gudlavalleti, B. P. Gearing, L. Anand
openaire +2 more sources
2014
Two series of flexural tests on 2700x600x75 mm Mi Panels are presented. The inner core of these lightweight panels is made from mixing polystyrene beads called Neopor, high strength cement, and water. A chemical is used as binding agent to bond the inner core to the external fibre cement sheets of 4.5 mm thickness.
Bukasa, G. M., Dundu, M.
openaire +1 more source
Two series of flexural tests on 2700x600x75 mm Mi Panels are presented. The inner core of these lightweight panels is made from mixing polystyrene beads called Neopor, high strength cement, and water. A chemical is used as binding agent to bond the inner core to the external fibre cement sheets of 4.5 mm thickness.
Bukasa, G. M., Dundu, M.
openaire +1 more source
Steel Research International
This article undertakes the tested and theoretical investigations on the flexural behaviors of high‐performance steel (HPS) beams subjected to local corrosion in pure bending zone.
Huang Tang +9 more
semanticscholar +1 more source
This article undertakes the tested and theoretical investigations on the flexural behaviors of high‐performance steel (HPS) beams subjected to local corrosion in pure bending zone.
Huang Tang +9 more
semanticscholar +1 more source
Composites Part B: Engineering, 2020
The flexural test was conducted to investigate crack resistance, loading bearing capacity, deformation characteristics and failure modes of damaged reinforced concrete (RC) beams strengthened by reinforced ultra-high performance concrete (UHPC) layer ...
Yang Zhang +3 more
semanticscholar +1 more source
The flexural test was conducted to investigate crack resistance, loading bearing capacity, deformation characteristics and failure modes of damaged reinforced concrete (RC) beams strengthened by reinforced ultra-high performance concrete (UHPC) layer ...
Yang Zhang +3 more
semanticscholar +1 more source
Flexural fatigue testing of polyesters
Journal of Applied Polymer Science, 1963AbstractA method is described for evaluating flexural fatigue properties of unsaturated polyesters. With the use of the Sonntag fatigue machine and a modified version of the Prot principle, dynamic parameters and fatigue properties can be readily determined.
openaire +1 more source
E -journal of dentistry, 2021
OBJECTIVE This study investigated the influence of postpolymerization of a three-dimensional (3D) printed denture base polymer. The effect of post-curing methods on surface characteristics, flexural strength, and cytotoxicity was evaluated.
Ping Li +4 more
semanticscholar +1 more source
OBJECTIVE This study investigated the influence of postpolymerization of a three-dimensional (3D) printed denture base polymer. The effect of post-curing methods on surface characteristics, flexural strength, and cytotoxicity was evaluated.
Ping Li +4 more
semanticscholar +1 more source
, 2021
The purpose of this study was to investigate the effect of total volume fraction and combinations of macro and micro steel fiber on the workability and mechanical as well as flexural performance of hybrid reinforced self-compacting concretes (HFR-SCC). A
K. Turk +2 more
semanticscholar +1 more source
The purpose of this study was to investigate the effect of total volume fraction and combinations of macro and micro steel fiber on the workability and mechanical as well as flexural performance of hybrid reinforced self-compacting concretes (HFR-SCC). A
K. Turk +2 more
semanticscholar +1 more source