Results 121 to 130 of about 4,903,273 (300)
Experimental and Numerical Investigation of Cedar Façade Flame Spread With Respect to Sidewall
ABSTRACT In response to growing energy conservation and carbon neutrality efforts, façade systems incorporating wooden materials have attracted increasing attention, which in turn raises concerns about their combustibility. This study presents a combined experimental and numerical investigation of flame spread along cedar façades.
Xukun Sun +6 more
wiley +1 more source
This paper presents a meticulous bibliometric analysis of forensic accounting research conducted between 1991 and 2021, employing Scopus and VOSviewer.
Nejla Ellili +4 more
doaj +1 more source
ABSTRACT This study addresses the influence of fibre architecture on the mechanical properties of vacuum‐infused glass fibre reinforced polymer (GFRP) composites at elevated temperatures (ET). Laminates with three different fibre configurations—unidirectional (UD), bidirectional 0°/90° cross‐ply (BD), and ±45° off‐axis angle‐ply (OA) – were tested in ...
Eloísa Castilho +4 more
wiley +1 more source
A bibliometric analysis of research on forensic accounting from 2006 to 2024
This study examines the key trends, impacts, and contributions of research on forensic accounting from 2006 to 2024. Data were extracted from the Scopus database, and 109 research papers were filtered by applying the PRISMA framework, followed by a ...
Sunil Kumar, Shiran Khan, Reena Yadav
doaj +1 more source
Char Layer Thickness Evolution During Structural Timber Fire Experiment and Final Density Profile
ABSTRACT This paper evaluates several non‐destructive experimental methods for determining the char layer thickness and its density profile in structural timber samples exposed to standard ISO 834 fire curve experiments. Microwave echo pulse, ultrasonic echo pulse, X‐ray computed tomography, and resistance drilling were evaluated.
Fernando Pérez Pérez +4 more
wiley +1 more source
ABSTRACT Fire sources in actual compartment fires exhibit a predominantly uneven spatial distribution. In this context, the impact of the height and location of the fire source, as well as the heat release rate (HRR) of the fire, on the thermal characteristics of Externally Venting Flames (EVF) is experimentally investigated.
Dionysios I. Kolaitis +1 more
wiley +1 more source
ABSTRACT Heat induced delamination (HID) is a phenomenon in engineered wood products which may result in the detachment of the bonded timber lamellae before charring propagates to the bond line interphase. This study aims to correlate the thermal degradation of two 1‐c‐polyurethane adhesives at the microscale to the thermo‐hydro‐mechanical behaviour of
A. Čolić +4 more
wiley +1 more source
ABSTRACT Fires in recycling facilities are known for producing noxious fumes, having high heat release rates (HRRs), being difficult to extinguish and causing significant devastation to business operations. This research aims to provide experimental data and numerical models from which performance‐based designs can be developed for recycling facilities.
Courtney Devine +3 more
wiley +1 more source
Charring Behaviour of Mass Timber: A Comparison of Thin Intumescent Coatings and Plasterboard
ABSTRACT This study compares the charring behaviour of mass timber under varied heating conditions when protected by either different thin intumescent coating types or fire‐rated plasterboard layers. Bench‐scale fire experiments were conducted using the Heat‐Transfer Rate Inducing System (H‐TRIS).
Stavros Spyridakis +4 more
wiley +1 more source
Burning Lessons: The Failure to Learn From Major Fire Incidents
ABSTRACT Major fire disasters continue to cause substantial loss of life, economic damage, and social disruption worldwide. Although investigations occur in most countries, lessons learned are often fragmented, published in incompatible formats, or not published at all.
Anja Hofmann‐Boellinghaus +1 more
wiley +1 more source

