Results 161 to 170 of about 1,283,771 (199)
Some of the next articles are maybe not open access.

Development of melamine–formaldehyde resin microcapsules with low formaldehyde emission suited for seed treatment

Colloids and Surfaces B: Biointerfaces, 2015
To reduce the application frequency and improve the efficacy of insecticides, melamine-formaldehyde (MF) resin microcapsules suited for seed treatment containing a mixture of fipronil and chlorpyrifos were prepared by in situ polymerization. A formaldehyde/melamine molar ratio of 4:1 yielded microcapsules with the smallest size and the most narrow size
Huizhu, Yuan   +4 more
openaire   +2 more sources

Formaldehyde Emissions from Urea-Formaldehyde– and No-Added-Formaldehyde–Bonded Particleboard as Influenced by Temperature and Relative Humidity

Forest Products Journal, 2012
ABSTRACT It is well documented that temperature and humidity can influence formaldehyde emissions from composite panels that are produced using urea-formaldehyde (UF)–type adhesives. This work investigates the effect of temperature and humidity on newer commercial California Air Resources Board (CARB) phase II–compliant particleboard produced ...
Charles R. Frihart   +3 more
openaire   +1 more source

Characterizing Formaldehyde Emission Rates in a Gross Anatomy Laboratory

Applied Occupational and Environmental Hygiene, 2001
The evaporation of formaldehyde from cadavers in gross anatomy laboratories can produce high exposures among students and instructors. To understand the system that produces exposures and to plan for implementing control options, the generation of formaldehyde vapors must be characterized.
C B, Keil   +2 more
openaire   +2 more sources

Replacing formaldehyde by furfural in urea formaldehyde resin: effect on formaldehyde emission and physical–mechanical properties of particleboards

European Journal of Wood and Wood Products, 2016
To diminish the formaldehyde emission, replacement of the formaldehyde by furfural in urea formaldehyde (UF) resin was investigated and its effect on formaldehyde emission and physical–mechanical properties of particleboard panels produced from poplar wood was examined.
Robab Ghafari   +3 more
openaire   +1 more source

Influence of Process Variables on the Reactivity of Low Formaldehyde Emission Urea-Formaldehyde Resin

Polymer-Plastics Technology and Engineering, 2008
One of the important characteristics of the thermosetting resins such as urea-formaldehyde resin is the cure property. This is an invaluable characteristic for determining the processing capabilities of the resin. Differential scanning calorimetry (DSC) measurements are ideally suited to achieve this end.
Tang Lee Han   +3 more
openaire   +1 more source

Melamine-urea-formaldehyde resins with low formaldehyde emission and resistance to boiling water

Pigment & Resin Technology, 2019
Purpose The purpose of the study was to prepare melamine-urea-formaldehyde (MUF) resin that would be resistant to boiling water and high temperature and exhibit low formaldehyde emission. Design/methodology/approach The authors prepared MUF resin with different F/(M + U) and changed the amount of melamine added, through the analysis of MUF resin ...
Bo Wang   +3 more
openaire   +1 more source

Application of nanoparticles to reduce formaldehyde emissions

Лесные экосистемы как глобальный ресурс биосферы: вызовы, угрозы, решения в контексте изменения климата. Материалы Международного лесного форума, 2022
T.V. Efimova   +2 more
openaire   +1 more source

MINIMISATION OF FORMALDEHYDE EMISSIONS

1999
Michael Hall   +2 more
openaire   +1 more source

The Analysis of the Plywood Formaldehyde-Emission Loose

2009 3rd International Conference on Bioinformatics and Biomedical Engineering, 2009
Qing-Zhi Ma   +5 more
openaire   +1 more source

Home - About - Disclaimer - Privacy