Results 211 to 220 of about 3,765 (264)
Some of the next articles are maybe not open access.
Fracture Porosity of Naturally Fractured Reservoirs
Proceedings of First International Oil Conference and Exhibition in Mexico, 2006Abstract The storage capacity ratio, ω, measures the flow capacitance of the secondary porosity and the interporosity flow parameter, λ, is related to the heterogeneity scale of the system. Currently, both parameters λ and ω are obtained from well test data by using the conventional semilog analysis, type-curve matching or the TDS ...
D. Tiab, D. P. Restrepo, A. Igbokoyi
openaire +1 more source
Hydraulic Fracturing for Reservoir ManagementHydraulic Fracturing for Reservoir Management
Journal of Petroleum Technology, 2002This article is a synopsis of paper SPE 71655, "Hydraulic Fracturing for Reservoir Management: Production Enhancement, Scale Control, and Asphaltine Prevention," by M.R. Norris, S.N. Gulrajani, and A.K. Mathur, Schlumberger; J. Price and D. May, Amerada Hess, originally presented at the 2001 SPE Annual Technical Conference and Exhibition, New Orleans ...
openaire +1 more source
Hydraulic Fracturing in a Naturally Fractured Reservoir
International Petroleum Conference and Exhibition of Mexico, 1994Abstract Hydraulic fracturing of wells in naturally fractured reservoirs can differ dramatically from fracturing wells in conventional isotropic reservoirs. Fluid leakoff is the primary difference. In conventional reservoirs, fluid leakoff is controlled by reservoir matrix and fracture fluid parameters.
L. K. Britt, C. J. Hager, J. W. Thompson
openaire +1 more source
Shale Reservoirs Multi-Fracture Fracturing Technique and Studies on Reservoirs Stresses
Advanced Materials Research, 2014Theoretical studies have shown that the generation of the hydraulic fractures reduces or even reverses the stress anisotropy near the fractures and results in increasing the complexity of fractures. A finite element model was established in which the pore pressure elements were used to simulate the behavior of porous media and the pore pressure ...
Guang Ming Zhang +4 more
openaire +1 more source
Development of a special connection fracture model for reservoir simulation of fractured reservoirs
Journal of Petroleum Science and Engineering, 2019Abstract The significant world oil and gas reserves related to naturally fractured carbonate reservoirs adds new frontiers to the development of upscaling and numerical simulation procedures for reducing simulation time. This work aims to accurately represent fractured reservoirs in reservoir simulators within a shorter simulation time when compared ...
Manuel Gomes Correia +2 more
openaire +1 more source
Evaluation of Fractured Reservoirs
Society of Petroleum Engineers Journal, 1969Abstract Efforts were made to find improved means for locating fractures penetrated by a wellbore and for estimating fracture reservoir volume. The four approaches to the problem utilized acoustic logs, porosity estimates from different sources, transient pressure and fluid flow data, and resistivity logs.
G.R. Pickett, E.B. Reynolds
openaire +1 more source
Fractured Reservoir Simulation
Society of Petroleum Engineers Journal, 1980Abstract This paper describes the development of a three-dimensional (3D), three-phase model for simulating the flow of water, oil, and gas in a naturally fractured reservoir. A dual porosity system is used to describe the fluids present in the fractures and matrix blocks.
L. Kent Thomas +2 more
openaire +1 more source
1st EAGE North African/Mediterranean Petroleum & Geosciences Conference & Exhibition, 2003
T035 FRACTURED RESERVOIR MODELING Introduction 1 A fractured reservoir analysis pointed out some major problems as: fracture porosity evaluation matrix block size matrix-fracture exchange factor and the equivalent permeability evaluation. Moreover interaction between fractures at different scale is another critical aspect for production in fractured ...
C. Toscano +4 more
openaire +1 more source
T035 FRACTURED RESERVOIR MODELING Introduction 1 A fractured reservoir analysis pointed out some major problems as: fracture porosity evaluation matrix block size matrix-fracture exchange factor and the equivalent permeability evaluation. Moreover interaction between fractures at different scale is another critical aspect for production in fractured ...
C. Toscano +4 more
openaire +1 more source
2021
Fractured-basement reservoirs are igneous or metamorphic rocks having no matrix porosity and low secondary fracture porosity of ~2–3% and generally are devoid of adequate void space to hold sufficient volume of hydrocarbons for economic production.
openaire +1 more source
Fractured-basement reservoirs are igneous or metamorphic rocks having no matrix porosity and low secondary fracture porosity of ~2–3% and generally are devoid of adequate void space to hold sufficient volume of hydrocarbons for economic production.
openaire +1 more source
Fracturing Carbonate Reservoirs: Acidising Fracturing or Fracturing with Proppants?
SPE Asia Pacific Hydraulic Fracturing Conference, 2016Abstract Carbonate reservoir with low permeability is developed using fracturing technology to effectively stimulate the reservoir for a higher productivity. However, as the carbonate reservoir features extreme heterogeneity, not every fracture is created equally as is obtainable through acidizing fracturing or using proppant.
Jiwon Jeon +3 more
openaire +1 more source