Results 261 to 270 of about 8,660,418 (387)

Numerical Studies of Influencing Factors on the Homogeneity of the Powder Mixture during the Powder Spreading Process of Powder Bed Fusion–Laser Beam/Metal

open access: yesAdvanced Engineering Materials, EarlyView.
AISI 304L stainless steel powder is mixed with silicon nitride (Si3N4) powder and processed by PBF‐LB/M, allowing partial retention of Si3N4. The numerical approach effectively predicts the Si3N4 powder homogeneity and N content distribution on the powder bed. Recent studies have focused on the alloying of nitrogen (N) in high‐alloy stainless steels by
Yuanbin Deng   +7 more
wiley   +1 more source

Icephobic Gradient Polymer Coatings Coupled with Electromechanical De‐icing Systems: A Promising Ice Repellent Hybrid System

open access: yesAdvanced Engineering Materials, Volume 27, Issue 13, July 2025.
A hybrid system for de‐icing made of gradient polymer coatings, deposited on aluminum coupled with an electromechanical system, is demonstrated as an effective and durable strategy for reducing drastically ice adhesion. The system is capable of detaching ice blocks over the coating in less than 1 s, regardless of the ice type and covered area ...
Gabriel Hernández Rodríguez   +8 more
wiley   +1 more source

Influence of Cooling Rate on Primary Silicon Size in Hypereutectic Al–Si Alloy Fabricated by Laser Powder Bed Fusion

open access: yesAdvanced Engineering Materials, EarlyView.
Al–Si alloys are particularly in demand for automotive and electronic applications, thanks to their excellent wear and thermal properties. Nevertheless, when processed by conventional methods with low cooling rates, the coarse primary Si phases are responsible for increasing brittleness and inducing crack propagation.
Layla Shams Tisha   +3 more
wiley   +1 more source

Embodied decisions as active inference. [PDF]

open access: yesPLoS Comput Biol
Priorelli M, Stoianov IP, Pezzulo G.
europepmc   +1 more source

Non‐Destructive and Mechanical Characterization of the Bond Quality of Co‐Extruded Titanium‐Aluminum Profiles

open access: yesAdvanced Engineering Materials, EarlyView.
This study investigates the bond quality of co‐extruded aluminum–titanium hybrid profiles, focusing on the lateral angular co‐extrusion (LACE) process. It examines how heat treatments (HT) affect intermetallic phase formation, bond strength, and material properties.
Norman Mohnfeld   +9 more
wiley   +1 more source

Comparative Wear and Friction Analysis of Sliding Surface Materials for Hydrostatic Bearing under Oil Supply Failure Conditions

open access: yesAdvanced Engineering Materials, EarlyView.
Hydrostatic bearings excel in high‐precision applications, but their performance hinges on a continuous external supply. This study evaluates various material combinations for sliding surfaces to mitigate damage during supply failures or misalignment and to discover the most effective materials identified for enhancing the reliability and efficiency of
Michal Michalec   +6 more
wiley   +1 more source

Home - About - Disclaimer - Privacy