Results 11 to 20 of about 562 (196)

Stirling Engine and oil-free compressors [PDF]

open access: yesE3S Web of Conferences, 2021
Refering to figure 1 [Fig.1], an oscillating « flipper » piston (1) and its associated chamber (2) are maintained without reciprocal contact. No oil is required because there is no contact and so no friction.
Raballand Thierry
doaj   +2 more sources

Improving Free-Piston Stirling Engine Specific Power [PDF]

open access: yes12th International Energy Conversion Engineering Conference, 2014
This work uses analytical methods to demonstrate the potential benefits of optimizing piston and/or displacer motion in a Stirling engine. Isothermal analysis was used to show the potential benefits of ideal motion in ideal Stirling engines. Nodal analysis is used to show that ideal piston and displacer waveforms are not optimal in real Stirling ...
Maxwell H. Briggs   +2 more
openaire   +3 more sources

Free-Piston Stirling Engine demonstrator test plan [PDF]

open access: yes, 1978
Mechanical Technology Incorporated is developing a 1 KWe Free-Piston Stirling ENgine (FPSE) Power System. The plan for testing the demonstrator power system is presented. The test hardware is a Free-Piston Stirling Engine prime mover driving a linear alternator. The demonstrator system is basically a modular assembly.
openaire   +3 more sources

THE STUDY, DESIGN AND SIMULATION OF A FREE PISTON STIRLING ENGINE LINEAR ALTERNATOR [PDF]

open access: yesCarpathian Journal of Electrical Engineering, 2014
This paper presents a study, design and simulation of a Free Piston Stirling Engine Linear Alternator. There are presented the main steps of the magnetic and electric calculations for a permanent magnet linear alternator of fixed coil and moving magnets ...
Teodora Susana OROS (POP), Ioan BERINDE
doaj   +1 more source

Improving Power Density of Free-Piston Stirling Engines [PDF]

open access: yes14th International Energy Conversion Engineering Conference, 2016
Analyses and experiments demonstrate the potential benefits of optimizing piston and displacer motion in a free-piston Stirling Engine. Isothermal analysis shows the theoretical limits of power density improvement due to ideal motion in ideal Stirling engines.
Briggs, Maxwell H.   +2 more
openaire   +3 more sources

The Basics of Controlling a Free Piston Stirling Engine

open access: yesBiosciences, Biotechnology Research Asia, 2015
Lev Y. Lezhnev   +2 more
openaire   +2 more sources

tarting Control of Free Piston Stirling Linear Generator System Based on FOC

open access: yesCES Transactions on Electrical Machines and Systems, 2022
Aiming at the problem of poor system dynamic performance caused by low parameter matching in the coordinated control of Stirling engine and linear generator in the starting stage control of free piston Stirling linear generator system, a joint control ...
Qiaoling Yang   +4 more
doaj   +1 more source

Investigation into the Influence of Parallel Offset Wear on Stirling Engine Piston Rod Oil-Free Lubrication Seal

open access: yesMachines, 2022
The oil-free lubrication seal of a piston rod plays an important role in the application of a Stirling engine. Parallel offset in a piston rod ruins the symmetry of the seal and affects the sealing performance when the seal is worn.
Wenhan Cao   +5 more
doaj   +1 more source

Copper water heat pipe applied for Stirling engine

open access: yesBrazilian Journal of Radiation Sciences, 2022
Power generation in remote locations requires the advancement of efficient and long-lasting power generation technologies. One possible solution is a microreactor, which uses heat pipes to transport fission heat from a nuclear source to Stirling engines ...
Ana Carolina Santos   +2 more
doaj   +1 more source

Performance analysis of free piston Stirling engine based on the phasor notation method [PDF]

open access: yesE3S Web of Conferences, 2021
The free piston Stirling engine (FPSE) is a couple system of dynamics and thermodynamics. Due to the complicated and interactive relationships between the dynamic parameters and thermodynamic parameters, the performance of the FPSE is always difficult to
Chen Pengfan   +5 more
doaj   +1 more source

Home - About - Disclaimer - Privacy