Results 41 to 50 of about 469,050 (204)
Vibration tests on vidicons made by improved method [PDF]
Sensitive method is used for checking the performance of vidicons in mechanical vibration tests. The image of the desired fine-detail test pattern is stored in the photosensitive surface of the vidicon while the system is free of mechanical vibration ...
core +1 more source
When an elevator rope for a high-rise building is forcibly excited by the displacements of the building induced by wind forces and/or by long-period ground motion, rope displacement becomes large even if the ground acceleration and the buildings ...
Hiroyuki KIMURA
doaj +1 more source
Effects of vertical vibration on hopper flows of granular material [PDF]
The discharge of granular material from a hopper subject to vertical sinusoidal oscillations was investigated using experiments and discrete element computer simulations.
Brennen, C. E. +4 more
core +1 more source
When an elevator rope for a high-rise building is forcibly excited by the displacements of the building induced by wind forces and/or by long-period ground motion, rope displacement becomes large even if the ground acceleration and the buildings ...
Hiroyuki KIMURA
doaj +1 more source
An investigation of the Effect of Asymmetry on the Free Vibration Behavior of Sandwich Structure
This study presents a free vibration analysis of asymmetric sandwich structures comparatively. Sandwich structures were manufactured by the hand-layup vacuum bagging method.
Ufuk Demircioğlu +2 more
doaj +1 more source
ENERGY DISSIPATION CHARACTERISTICS OF NON-LINEAR NORMAL VIBRATION CONTACT INTERFACE
The energy dissipation characteristics of the non-linear normal vibration contact system of the interface have important theoretical and engineering significance for describing the dynamic mechanism of the interface.Based on Hertz contact theory, the ...
ZHANG MingSong +4 more
doaj
Free vibrations of toroidal shells.
In this paper, the free vibrations of toroidal shells with circular cross section are analyzed by using a thin shell theory. The equations of motion and the boundary conditions are derived from the stationary conditions of the Lagrangian of the toroidal shell.
Tadashi KOSAWADA +2 more
openaire +3 more sources
Transient vibration analysis of a completely free plate using modes obtained by Gorman's superposition method [PDF]
This paper shows that the transient response of a plate undergoing flexural vibration can be calculated accurately and efficiently using the natural frequencies and modes obtained from the superposition method.
Ilanko, Sinniah, Yusuke, Mochida
core +2 more sources
Compression springs used for vibration isolation [PDF]
System that employs opposed pairs of compression springs can be totally compressed to provide a ''hard mount'' during component installation and adjustment, and can be released to a free-floating condition for vibration isolation during ...
Norman, R. M.
core +1 more source
FREE VIBRATION ANALYSIS OF STIFFENED CONICAL SHELL
This paper presents a procedure for the free vibration analysis of stiffened conical shell by the finite element method. The element used is a modified eight-node superparametric shell element.
Somer M. Nacy +2 more
doaj +1 more source

