Results 81 to 90 of about 231 (118)

Study of Friction Stir Spot Welding (FSSW) of 4mm thick Aluminium Alloy 6061 and its Investigation

International Journal for Research in Applied Science and Engineering Technology, 2019
openaire   +1 more source

Corrigendum to “The effect of pin diameter, tool penetration depth and plate arrangement on mechanical and metallurgical properties of 6061-T6 and 5052-T32 aluminum dissimilar joints in friction stir spot welding (FSSW)” [Heliyon Volume 10, Issue 17, September 2024, Article e36962]

Heliyon
Vahid Feizollahi, Yousef Gerami, Ahmad Saki, Behrooz Adelizadeh, Mahmood Zamani, Mehdi Ghobeiti Hasab, Ali Heidary Moghadam   +6 more
openaire   +2 more sources

Some of the next articles are maybe not open access.

Related searches:

Refill Friction Stir Spot Welding (Refill FSSW) of Magnesium Lithium Alloys: Effects of Air and Argon Cooling

Science and Technology of Welding and Joining, 2021
Magnesium-lithium alloys are among the lightest commercially-available structural alloys. However, the reactive nature of Mg and Li makes fusion welding of this family of alloys very difficult, if ...
Amir A Shirzadi, Juyong Cao
exaly   +2 more sources

Investigation of Weld Zone Obtained by Friction Stir Spot Welding (FSSW) of Aluminium-6061 Alloy

Materials Today: Proceedings, 2019
Abstract In the present study, an investigation of the friction stir spot welding (FSSW) of Aluminum 6061 alloy 1 mm thickness sheet has been performed. Radiography images have been used to study the weld properties and the flaws. The study shows the effect of tool rotation speed, dwell time and tool pin diameter on the weld created.
Ankit Kumar Pandey, S S Mahapatra
exaly   +2 more sources

Experimental Investigation and Finite Element Simulation of Friction Stir Spot Welding (FSSW) of High-Density Polyethylene Joints

Materials Today: Proceedings, 2021
Abstract Friction stir spot welding (FSSW) is an essential aspect of traditional friction stir welding (FSW). When compared with standard welding methods, this method creates high-quality joints. The FSSW is a modern welding technique that is used for welding polymer materials that are hard to weld using regular welding methods.
Manish T. Shete, Ravindra B. Yarasu
exaly   +2 more sources

Friction Stir Spot Welding (FSSW) of Aluminum Sheets: Experimental and Simulative Analysis

Key Engineering Materials, 2013
Friction Stir welding (FSW) is a solid state joining process developed by TWI (The Welding Institute) in 1991. This technology is suitable for joining different materials even considered difficult to be welded using more traditional techniques and it is appropriate to weld materials in different configurations (such as butt, lap, circumferential, T ...
Claudio Giardini, Gianluca D'Urso, Michela Longo   +2 more
exaly   +2 more sources

Energy Generation During Friction Stir Spot Welding (FSSW) of Al 6061-T6 Plates

Materials and Manufacturing Processes, 2010
Effective and reliable computational models would greatly enhance the study of energy dissipation during the friction stir spot welding (FSSW) process. Approaches for the computational modeling of the FSSW process, however, are still under development, and much work is still needed, particularly the application of explicit finite element (FE) codes for
Mokhtar Awang
exaly   +2 more sources

Development of Novel Heating Tool Friction Stir Spot Welding (HT-FSSW) for AZ31 Magnesium Alloy

Science and Technology of Welding and Joining, 2014
In this work, a new heating tool friction stir spot welding (HT-FSSW) process was developed, and its impacts on the microstructure and mechanical properties of the welded AZ31 magnesium alloy joints were investigated by microstructure observation, tensile tests and microhardness tests. An increase in the heating tool temperature resulted in a decrease
Xian Luo, Dan Wang
exaly   +2 more sources

Thermo-Mechanical Investigations During Friction Stir Spot Welding (FSSW) of AA6082-T6

Welding in the World, Le Soudage Dans Le Monde, 2010
Friction Stir Spot Welding (FSSW) is a variant of the Friction Stir Welding (FSW) process and has been successfully used in industrial applications. During the FSSW process, thermal inputs due to friction and deformation are commenced simultaneously, as the non-consumable rotating tool plunges into the workpiece to be welded.
Norbert Enzinger
exaly   +2 more sources

Mechanical and Thermal Properties of Identified Zones at a Ti-Based Bulk Metallic Glass Weld Spot Jointed by Friction Stir Spot Welding (FSSW)

Journal of Non-Crystalline Solids, 2020
Abstract The weld spot of (Ti41Zr25Be28Fe6)93Cu7 bulk metallic glass is characterized after friction stir spot welding. The mechanical and thermal properties of different zones of the weld spot are studied using X-ray diffraction, Vickers micro hardness, nanoindentation and differential scanning calorimetry.
Zahra Jamili-Shirvan, Mohsen Haddad-Sabzevar, Jalil Vahdati-Khaki, Ke-Fu Yao   +3 more
exaly   +2 more sources