Results 1 to 10 of about 9,653 (213)
Abstract Reinforced concrete (RC) beams can be subjected to torsion, and failure due to torsion is brittle and poses a significant risk to occupants. Moreover, strengthening of existing RC beams in torsion may be required due to the upgrade of the structures or as part of structural rehabilitation.
Ahmed Hamoda +4 more
wiley +1 more source
Abstract The preservation of reinforced concrete masterpieces from the 20th century poses a complex challenge. These structures often combine architectural, historical, and technological value, which standard engineering codes and conservation practices are not fully equipped to address. The Erasmus+ REcube project responded to this gap by promoting an
Elisabetta Margiotta Nervi +2 more
wiley +1 more source
Abstract Fiber reinforced polymer (FRP) wrapping technology is commonly used to enhance the compressive strength (CS) of reinforced concrete (RC) members. Accurate prediction of the compressive strength of FRP‐confined concrete columns is crucial for optimizing structural design and helps reduce the time and costs associated with physical testing ...
XuanRui Yu +5 more
wiley +1 more source
Ferula (Ferula elaeochytris) as a phytoestrogen: Use of Ferula in laying hens
This study aims to examine the effects of Ferula root powder (FRP) on performance, egg quality, egg oxidant/antioxidant levels, some serum hormone/biochemical parameters, and physical properties of the oviduct in laying hens. A total of 72 (8 replicates,
Arda Onur Özkök, Gözde Kılınç
doaj +1 more source
Numerical analysis of debonding behavior of FRP sheets bonded to concrete focusing on mortar skin
Abstract This paper proposes a novel simple method for finite element analysis (FEA) to simulate the debonding behavior of fiber‐reinforced polymer (FRP) sheets bonded to concrete. This study focuses on the mortar skin of the concrete surface layer, which fails during FRP sheet debonding.
Mitsuhiko Ozaki, Yasuhiko Sato
wiley +1 more source
Abstract In practice, reinforced concrete (RC) wall‐like columns often have openings to facilitate building services, which creates stress concentrations around the opening, resulting in the weakening of their load‐carrying capacity. This study proposes innovative strengthening methods using near‐surface mounted (NSM) incorporating steel materials to ...
Ahmed Hamoda +4 more
wiley +1 more source
Abstract This study introduces an innovative approach to strengthening defected reinforced concrete (RC) columns using externally bonded stainless steel and galvanized steel plates. Unlike conventional strengthening methods, this technique replaces traditional transverse stirrups with steel sheets, providing enhanced confinement and ductility.
Ahmed Hamoda +5 more
wiley +1 more source
Abstract Textile reinforced mortar (TRM) systems have emerged as an effective alternative to conventional FRP strengthening solutions due to their compatibility with concrete substrates and favorable performance under adverse environmental conditions.
Ömer Mercimek +4 more
wiley +1 more source
Abstract This study evaluates the seismic performance of elevated reinforced concrete (RC) water tanks in the Elbistan region following the February 6, 2023 Kahramanmaras–Elbistan earthquakes. Field investigations, visual damage surveys, non‐destructive testing (ultrasonic pulse velocity—UPV), concrete compressive strength measurements, peak ground ...
Mustafa Eken
wiley +1 more source
ABSTRACT Abnormal heating due to decay‐like degradation in composite insulators is influenced by environmental moisture, but the relationship between the internal degradation status of the core rods and their electrical properties under varying humidity conditions remains poorly understood. In this work, the decay‐like degraded fibre‐reinforced polymer
Shuqi Liu +8 more
wiley +1 more source

