Results 1 to 10 of about 44,976 (294)
Improving the Yield and Quality of Tar during Co-pyrolysis of Coal and Cotton Stalk
Co-pyrolysis of Shenmu coal (SM) and cotton stalk (CS) at different blend ratios were carried out in a tubular furnace. The pyrolysis temperature was up to 600 °C at 5 °C/min and kept for 15 min. The results indicated that there was an interactive effect
Chuyang Tang, Dexiang Zhang, Xilan Lu
doaj +1 more source
Simultaneous removal of SO2 and NOx with ammonia combined with gas-phase oxidation of NO using ozone [PDF]
A process for simultaneous desulfurization and denitrification was proposed, which was made up of ozone as the oxidizing agent for NO and ammonia solution as absorbent. The results showed that the presence of SO2 and the concentration changes of
Guo Shaopeng +7 more
doaj +1 more source
Study on the thermal stability of the bio-oil components by Py-GC/MS
Pyrolysis-gas chromatograph/mass spectrometry (Py-GC/MS) was used to study the thermal stability of the bio-oil components as the pyrolysis temperature increased from 100 °C to 550 °C. The peak area changes of 66 typical compounds identified by GC/MS are
Fuqiang Jin +4 more
doaj +1 more source
Simulation of co-production system based on coal partial gasification under different reactant gas atmospheres [PDF]
In order to explore the comparison of coal partial gasification hydrogen-electricity cogeneration systems under different gasification agent atmospheres, based coal partial gasification, including steam cycle power generation and syngas processing for ...
Zhang Zeyi, Shao Yingjuan
doaj +1 more source
With the help of Aspen Plus, a two-dimensional unsteady CFD model is developed to simulate the coal gasification process in a fixed bed gasifier. A developed and validated two dimensional CFD model for coal gasification has been used to predict and ...
Tamer M. Ismail +5 more
doaj +1 more source
One of the most important technologies for the effective and clean use of coal is gasification. Currently, one of the most advanced gasification technologies being employed extensively is large-scale water-coal slurry entrained flow gasification.
Jiyuan CHEN +6 more
doaj +1 more source
The addition of aluminum particles to gel propellants can improve combustion performance. However, the agglomeration of aluminum during the combustion process can result in a series of negative effects.
Jiyuan Chen +3 more
doaj +1 more source
Gasification GASIFICATION OF ORGANIC WASTE IN UPDRAFT GASIFIER
The majority of Indonesia's waste is organic and could potentially be converted to energy. The most effective method for converting waste into energy is gasification with updraft gasifier. Different types of waste are contained in organic waste, which has a high moisture content ranging from 16.95% to 53.74% collected from TPST Piyungan, Yogyakarta ...
openaire +1 more source
Effects of Adding Pyrochar and Hydrochar to Calcareous Soil on Nutrient Uptake by Maize
The patterns and mechanisms underlying the effects of different types of biochar on crop dry matter accumulation and uptake of major soil minerals are uncertain.
Yuxiao Cai +11 more
doaj +2 more sources
Filling mining is a technology that can curb land subsidence, efficiently dispose of industrial solid waste, and quickly liberate the “three underground” coal resources.
Maoping ZHAO, Zhu WU
doaj +1 more source

